WinTV-PVR Installation and Reference Manual
Note: If a message stating "Windows was unable to locate a driver for
this device", you did not wait long enough for the WinTV Installation CD-
ROM to be read. Click Back and then click Next again for the CD to be
recognized.
When the window (Windows has finished installing the software that
your new hardware device requires) opens.
Click Finish
This completes the PVR driver installation for Windows 98SE.
Continue to Chapter 2 to install the application software.
Note: On those WinTV models equipped with remote control, after
rebooting your PC the Remote Control will be enabled.
Installing the WinTV-PVR-250/350 driver under
Windows Me
When re-starting Windows for the first time after the WinTV board is
installed, the New Hardware Found window will open.
Insert the WinTV Windows Installation CD-ROM into your CD-ROM
1-8