Optional Accessories; Center Plate With 50Mm Hole Ix-Cp50; Stage Clips Ix-Scl - Olympus BX3-SSU Instructions Manual

5 5
1
9
Downloaded from ManualsNet.com

OPTIONAL ACCESSORIES

2
Fig. 10
search engine
1

Center Plate with 50mm Hole IX-CP50

} When observing the wide range on the specimen in a large container,
etc., use the center plate with 50mm hole IX-CP50.
Be careful not to drop or apply a strong impact to the stage
CAUTION
center plate. Otherwise, it may be deformed.
2

Stage Clips IX-SCL

} The stage clips are used to fix a dish or petri dish sample.
1. Screw the stage clips 2 into the two stage clip holes @ on the scanning
stage with ultrasonic.
There are 4 screw holes @ on the stage. Use either 2 holes on the front
side or 2 holes on the rear side.
When using BX63, do not use 2 holes on the rear side. The
CAUTION
objective lens will interfere with the stage clip.
(Fig. 10)