feather & black Radley Single Bed Assembly Instructions

Pre-assembly Preparation
Please read these instructions fully prior to assembly to familiarise yourself with the various stages of
construction. Carefully open all packs supplied and check the contents against the parts and fittings check
list.
Do not destroy any of the packaging until you are certain that you have all the necessary parts for the
assembly.
This product is HEAVY, it should be assembled as near as possible to the point of use.
Take care when lifting to avoid personal injury and (or) damage to the product.
There are small components used in the construction of this bed as well as plastic foil packaging,
these should be kept away from young children whilst assembling your bed.
This product requires a minimum of 2 people to assemble.
Product Safety
All assembly fastenings should always be tightened properly and care should be taken to ensure that no
fittings are loose.
Periodically check and ensure that all components are in their proper position, free from damage, and that
all connectors are tight.
Once the bed is assembled, do not sit, stand or apply weight directly to the slats unless mattress is in place.
Product Care
To clean, slightly moisten cloth with water and wipe surfaces. A damp cloth holds dust and prevents damage.
repeat with a dry, soft, lint-free cloth.
Do not use abrasives or cleaning products which may contain ammonia or solvents.
Tools Required:
10RAD3000
Radley Single Bed
Assembly Instructions
1