Advertisement
Quick Links
ercol
pimlico 2 door wardrobe
10PIM 2000
Thank you for purchasing this pimlico 2 door wardrobe. Please read the instructions carefully before use to en-
sure safe and satisfactory operation of this product.
This item is HEAVY
Necessary Tools
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Please check the pack contents before attempting to assemble this product. A full checklist of components
is given in this leaflet. If any components are missing, please contact the retailer from whom you bought
this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 20 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Advertisement
Related Manuals for feather & black Ercol pimlico 2 door wardrobe 10PIM 2000
Summary of Contents for feather & black Ercol pimlico 2 door wardrobe 10PIM 2000
- Page 1 ercol pimlico 2 door wardrobe 10PIM 2000 Thank you for purchasing this pimlico 2 door wardrobe. Please read the instructions carefully before use to en- sure safe and satisfactory operation of this product. This item is HEAVY Necessary Tools Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Please check the pack contents before attempting to assemble this product.
- Page 2 Fittings and parts checklist Drawer unit x 1 Phillips bolt x 8 LH side panel x 1 30mm screw x 16 RH side panel x 1 25mm screws x 14 Door frame x 1 Dowels x 10 Wedge x 2 Top panel x 1 brackets x 2 Back panel x 1...
- Page 3 Step by step assembly instructions 1. Check that all the dowels are present on the side panels B & C as shown below. 2. Push the dowels on the bottom of the side panels into the holes on the top of the drawer unit A and secure with the 30mm screws K.
- Page 4 3. Attach the door frame, D onto the side panels B & C and drawer unit A using the 30mm screws K, and the Phillips head bolts J. 4. Attach the top panel, E onto the side panels B & C using the 30 mm screws K.
- Page 5 5. Attach the panel F to the rear of the wardrobe using the 30mm screws,L as shown. 6. Put the hanging rail, G into the hanging rail supports inside the wardrobe.
- Page 6 7. Fix the handles H and I onto the doors using the bolts Q. Use the screw 15mm screw, P to fix one of the brackets to the middle of the top of the wardrobe at the back. Wall fixing - if in doubt seek professional advice Wood Cavity wall Brick or Masonry...
- Page 7 8. Screw one of the brackets onto the top of the wardrobe in the middle along the back, see below. Position the wardrobe against the wall where you want it to go, place the second bracket onto the wall above the one fixed to the wardrobe and mark where the hole come on the wall. Move the wardrobe away from the wall.
- Page 8 11. If the wardrobe is not level on your floor, use the wedges provided. Snap them off so they do not protrude out from the wardrobes legs. You can also snap them lengthways. 12. Check that the doors are aligned correctly. If necessary adjust the door hinges as shown below...
-
Page 9: Care And Maintenance
ercol Care and maintenance Wood Furniture Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the nat- ural beauty of the wood.