Hoover PET PRO HBC2000P Instructions And Warranty page 6

ASSEMBLING THE PRODUCT
How to connect the hose with vacuum cleaner
Insert flexible hose into the air-intake opening on the front cover
Press the knob until it clicks into the position.
Remove the flexible hose:
Unplug the appliance and press the button at the end of the flexible hose
Remove it from the air-intake opening on the front cover.
Fit the telescopic hose to the angled pipe
Fit the multi floor tool to the telescopic tube
OPERATING INSTRUCTIONS
CAUTION: The air-intake nozzle and attachments must always be free of any obstructions,
otherwise the motor will overheat and could be damaged.
●
A yellow mark on power cord shows the ideal cable length. Do not extend the cable
beyond the red mark. To rewind the power cord, press the Cord Rewind Pedal with
one hand and guide the cord with the other hand.
●
Press the Power On/Off Pedal to switch the appliance on. Use the Power Level Knob
to control the suction power of the vacuum cleaner.
● The suction power may be adjusted with the Power Suction Control on the angled
pipe as well.