Electrical Connection - Hotpoint AHP69PX Operating Instructions Manual

Electrical Connection

Electrical connection
! THIS APPLIANCE MUST BE EARTHED.
Connecting the power supply cable
_
$
Yellow-Green $
Electrical Connection:
4 2
N L
omnipolar circuit breaker
Blue Brown
with a junction box
Power cable supply connection to the electrical
mains:
The plug must be accessible at all times.
Unplug the appliance before all operations, even
when replacing the oven lamp.
Using the appliance without correct earthing is
highly dangerous.
! After connecting the appliance to the flexible
cable, tighten all the screws on the terminal
board.
TABLE O. CHARACTERISTICS
width 43.5 cm
Dimensions
height 32 cm
depth 40 cm
Volume
56 l
voltage: 220-240 V~ 50/60Hz
Electrical
maximum power absorbed 2800W
connections
(see data plate)
Directive 2002/40/EC on the label of
electric ovens. Standard EN 50304
Energy consumption for Natural
ENERGY
convection – heating mode:
LABEL
Traditional mode
Declared energy consumption for
Forced convection Class – heating
mode:
This appliance conforms to the
following European Economic
Community directives: 2006/95/EEC
dated 12/12/06 (Low Voltage) and
subsequent amendments -
89/336/EEC dated 03/05/89
(Electromagnetic Compatibility) and
subsequent amendments -
93/68/EEC dated 22/07/93 and
subsequent amendments.
2002/96/EC
Baking
3
GB