Panasonic CS-E9EKK Service Manual page 36

• Detach 5 connectors as labeled from the electronic
controller. Then, pull it out slowly while pressing the fastener
to the right. (Fig. 5)
13.1.3. To remove the Discharge Grille
• Remove the drain hose from the discharge grille. (Fig. 6)
• Remove the screw holding the discharge grille. (Fig. 6)
• Then pull the discharge grille downward gently to dismantle
it. (Fig. 6)
• Remove 3 screws holding the control board. Press down the
control board fastener and the whole control board can be
removed. (Fig. 6)
13.1.4. To remove the Cross Flow Fan and Indoor Fan Motor
• Remove the bearing by pulling it out gently. (Fig. 7)
• Push the hook to the left and lift up the evaporator.
• Then, remove cross flow fan by pulling both cross flow fan
and fan motor.
36
Fig. 5
Fig. 6
Fig. 7
Fig. 8