Installation; Packaging And Accessories; Installation Requirements - Biasi MULTIPOINT 14S User Manual And Installation Instructions

Table of Contents

Advertisement

5

INSTALLATION

Contact your local gas safe registered install-
er who must also be qualified to work on gas
water heaters (users are recommended not to
install by themselves). The installer should be
called on to install and adjust the appliance,
where appropriate.
It is prohibited to use this gas water heater
when the flue pipe has not been installed cor-
rectly according to instructions.

5.1 Packaging and accessories

Description
Gas water heater
Expansion screws
Mounting screws
User manual
Self-tapping screws
Flue duct (C13 type) (optional)

5.2 Installation requirements

• The flue of the gas water heater should be
installed through an external wall, the heater
cannot be installed outdoors (Figure 5.1).
Indoor
Figure 5.1
- 18 -
INSTALLATION
Quantity
1
1
2
1
2
1
Outdoor
• The gas water heater installed in a suitably
ventilated room, in accordance with the reg-
ulations in force.
• The flue of the heater cannot be connected
to a common flue (Figure 5.2).
Figure 5.2
• Please don't install the heater in places
where special chemicals are used, such as
laundries or factories etc., otherwise it may
cause rusting, shorten the lifetime of the
heater, or prevent normal operation.
• Don't install the heater above the gas stoves
or other heat sources (Figure 5.3).
Figure 5.3
Common
flue

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipoint 16sSv14sSv16s

Table of Contents