Table of Contents
Advertisement
Machine Translated by Google
10 Press the YES ENTER/MENU button.
Press to confirm. It
returns to the programmed first track, and CD
or MD playback starts 8 seconds after
entering the recording state . After the
selected song has been recorded, the tape,
Both CD and MD stop automatically.
Press x to stop recording
halfway .
If the tape ends during recording
Tapes, CDs and MDs will automatically
stop.
Tips • When the
cassette lid is opened, the traveling direction is always facing B.
will be
• When recording on both sides (h), start recording from the
top side . If you start from the bottom side (b), the
recording will stop at the end of the bottom side. • If h is
selected and recorded, the upper side will
Even if it ends, it will be recorded again from the beginning of the song on the bottom
side.
• Even if you change the volume or sound quality during recording, the recorded sound will change.
It doesn't end.
• To erase songs recorded on tape, see page 86.
please look at.
please note
There will be approximately 8 seconds of silent recording at
the start of recording and when the tape is reversed . If you
press CDu or MDu immediately after step 10, recording will
start from that point.
Record manually
(manual recording - TAPE)
You can record only your favorite part of a
CD, MD, radio, etc.
1Insert the cassette with the side to be recorded facing up.
Insert a recording tape into the tape
deck.
Use TYPE I (normal) tape.
2Repeat the function button
Press to display "TAPE".
3 Press the MODE button repeatedly
to select single- sided recording (g) or
double-sided recording (h).
FUNCTION
MODE
DISPLAY
MDu
CDu
x
TAPE REC z/X
Continued on next page
record to tape 85
Record
Advertisement
Table of Contents
