Advertisement
Quick Links
Copyright(C) 2022 ZOOM CORPORATION. All Rights Reserved.
Introduction
■Item to prepare
Firmware update process
■
1. Download the firmware update file.
2. Extract the ZIP file.
3. Copy the extracted firmware update file to a microSD card.
4. Update the firmware.
5. Confirm that the firmware has been updated correctly.
Q8n-4K Firmware Update Guide
Proper display is not possible on grayscale devices.
Q8n-4K
microSD card
Windows or macOS computer
with Internet access
Supported recording media
microSDHC: 4 GB – 32 GB
microSDXC: 64 GB – 512 GB
Always format microSD cards on the Q8n-4K
after purchasing them new or using them with
a different device.
Advertisement
Related Manuals for Zoom Q8n-4K
Summary of Contents for Zoom Q8n-4K
- Page 1 Internet access Supported recording media microSDHC: 4 GB – 32 GB microSDXC: 64 GB – 512 GB Always format microSD cards on the Q8n-4K after purchasing them new or using them with a different device. microSD card Firmware update process ■...
-
Page 2: Updating The Firmware
Updating the Firmware This guide explains firmware update to version 1.03 as an example. 1. Download the firmware update file. Download the ZIP file that contains the firmware update file from the Q8n-4K download page. - Page 3 On Windows Select the folder that contains the downloaded ZIP file. Click ① “Compressed Folder Tools” and then click ② “Extract Extract the ZIP file all”. This extracts the ZIP file.
- Page 4 Copy the firmware update file to a microSD card. Copy the “Q8N4K_FW.BIN” file to a microSD card. Firmware update file Copy the firmware update file to a microSD card.
- Page 5 On macOS After downloading, open the ① “Downloads” folder which appears at the right end of the Dock by default. Extract the ZIP file. Then, click ②. Downloaded files will be shown. ① ② Copy the firmware update file to a microSD card. Copy the “Q8N4K_FW.BIN”...
- Page 6 Charge the battery enough or connect an AC adapter. NOTE The firmware update is not possible if the remaining battery power is low. Insert the microSD card into the Q8n-4K. Turn the power on while pressing Press to select “YES✓”.
- Page 7 Press to select “YES✓”. After updating, the Completion Screen opens. NOTE During the firmware update, do not turn the power off or remove the microSD card. After the firmware update completes, turn the power off. NOTE In the unlikely event that firmware update should fail, follow the procedures from the beginning again to update the firmware.
- Page 8 Confirming that the firmware has been updated correctly Check the firmware versions used by the Q8n-4K. Press on the Recording Screen. The SETTINGS Screen opens. Press on the SETTINGS Screen. Check the firmware version. System Ver. 1.03 DSP System Ver.
- Page 9 ● ZOOM CORPORATION will bear no responsibility for any losses or third-party claims resulting from the use of this software. Moreover, distribution, sale, leasing, rental, alteration, and reverse engineering without permission of this software are prohibited. The specifications of this software and the contents of this document could be changed without notice in the future.