Sanyo FW43D47F Owner's Manual page 14

PC connection
HDMI connection
This unit can be connected to your PC that has an HDMI terminal. Use
an HDMI cable for this digital connection.
IN IN IN
HDMI cable HDMI cable HDMI cable
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this video digital connection and
it requires stereo mini 3.5mm plug audio cable for analog audio signal as
well.
IN
Stereo mini 3.5 mm Stereo mini 3.5 mm Stereo mini 3.5 mm
plug audio cable plug audio cable plug audio cable
IN IN IN
HDMI-DVI HDMI-DVI HDMI-DVI
conversion cable conversion cable conversion cable
The following PC-input video signals can be displayed:
Format Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1,024 x 768
1,280 x 768
WXGA
1,360 x 768
FHD 1,920 x 1,080
Other formats or non-standard signals will not be displayed correctly.
OUT
PC
OUT
PC
OUT
Refresh rate
60Hz
Note(s)
Please purchase a HDMI-DVI conversion cable that has a ferrite core.
●
The following operations may reduce noise.
●
Attach a ferrite core to the AC power cord of your PC.
–
Unplug the AC power cord and use the built-in battery of your portable / laptop PC.
–
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable
●
is recommended for the better compatibility.
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
●
HDMI-DVI connection requires separate audio connections as well and the audio signals are
●
output as analog (L/R) audio.
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
●
USB memory stick
This unit offers easy playback of picture (JPEG) and video (Motion JPEG)
files.
Insert the USB memory stick into the USB terminal shown below.
USB L p. 31
Note(s)
The unit recognizes only a USB memory stick.
●
Do not use a USB hub or an extension cable to connect an external hard disk drive to the
●
unit. (Not supported.)
Always insert a USB memory stick directly to this unit.
●
A USB memory stick is not supplied with this unit.
●
We do not guarantee that all USB memory sticks can be supported by this unit.
●
Be sure to keep a backup copy of the original files on your USB device before you play them
●
back on this unit. We have no responsibilities for damage or loss of your USB stored data.
To protect your USB memory stick files from being erased place the write protect sliding
●
tab in the protect position (if available).
When you are ready to remove a USB memory stick, set the unit to go into standby mode
●
to avoid any damage to your data and the unit.
A USB memory stick that requires its own driver or the device with a special system such
●
as fingerprint recognition are not supported.
This unit is not allowed to use the USB memory stick which requires an external power
●
supply (500mA or more).
14 .
English
Continued on next page.