1
Remove existing showerhead and shower arm
2
Add plumber's tape to end of shower arm and thread
to existing plumbing to secure.
3
Add washer to showerhead connection and attach
to the shower arm by rotating hex nut clockwise by
hand first. Then slightly snug with a wrench.
Installation Instructions
Add washer to the hose hex nut. Attach hex end of
hose to showerhead. Add washer to tapered end of
hose. Connect tapered end to handshower.
Place handshower on handshower holder.
Product fully assembled.
Operations
4
5
Diverter
Showerhead
Both
Handshower