Rear Panel Connections - Harman Kardon HD 950 Owner's Manual

30525_HD_950_Eng 20/10/06
Rear-Panel Connections
¡
Digital Outputs
™
Audio Outputs
£
Remote Control Input
¡ Digital Output: Connect this jack to the
coaxial or optical digital input of an external
digital-to-analog converter for direct access to the
digital signals of the CD player or the external
digital audio source. DO NOT connect this jack to
the standard audio inputs of any device.
™ Audio Outputs: Connect these jacks to the
CD audio inputs of your receiver, surround
processor or preamplifier.
6 REAR-PANEL CONNECTIONS
8:58 Side 6
¢
Remote Control Output
∞
AC Power Cord
£ Remote Control Input:
Connect the output of a remote infrared sensor
or the remote control output of another
compatible Harman Kardon product. This will
enable the remote control system to operate
even when the front panel Remote Sensor 3
is blocked.
It will also allow use of the CD player with
optional, external control systems.
¢ Remote Control Output: Connect this
jack to the input of another compatible
Harman Kardon remote controlled device to
have the remote sensor on the CD player
provide signals to other products.
∞ AC Power Cord: Connect this plug to an
AC outlet. If the outlet is switch controlled, make
certain that the switch is in the ON position.