Rear Panel Connections - Harman Kardon FL 8370 Owner's Manual

Rear Panel Connections

¡ ™ £ ¢ ∞
IN
OUT
DIGITAL
OUTPUT REMOTE
AC INPUT
AC 230V ~ 50Hz
CLASS 1 LASER PRODUCT
20W
HDCD ® and High Definition Compatible Digital
are registered trademarks of Pacific Microsonics, Inc.
¡ AC Power Cord
™ Coaxial-Digital Output
£ Remote Control Output
¡ AC Power Cord: Connect this plug to an AC
outlet. If the outlet is switch controlled, make cer-
tain that the switch is in the ON position.
™ Coaxial-Digital Output: Connect this
jack to the coaxial-digital input of a digital
audio/video receiver or an external digital-to-
analog converter for direct access to the digital
signals of the FL 8370. DO NOT connect this jack
to the standard audio inputs of any device.
£ Remote Control Output: Connect this
jack to the input of another compatible Harman
Kardon remote controlled device to have the
remote sensor on the FL 8370 provide signals to
other products.
LEFT
CA UTI ON
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RIGHT
SHOCK HAZARD: DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
AUDIO
OUTPUT
SERIAL NO.
WARNING: TO REDUCE THE RISK OF FIRE OR
®
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
®
¢ Remote Control Input
∞ Analog Audio Outputs
¢ Remote Control Input: Connect the out-
put of a remote infrared sensor or the remote
control output of another compatible Harman
Kardon product. This will enable the remote con-
trol system to operate even when the front panel
Remote Sensor  is blocked. It will also allow
use of the FL 8370 with optional, external control
systems.
∞ Analog Audio Outputs: Connect these
jacks to the analog CD audio inputs of your
receiver, surround processor or preamplifier.
MODEL NO.: FL 8370
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, U.S.A.
MADE IN CHINA
REAR PANEL CONNECTIONS 7