Table of Contents
Advertisement
30525_HD_950_Eng
20/10/06
Remote Control Functions
0 Power Off: Press this button to put the
unit in the Standby mode.
1 Power On: Press this button to turn on the
CD player. Note that in order for the Power On
button to operate, AC power must be applied to
the unit, and the Status Mode Indicator 2
should glow orange (See page 11 for more infor-
mation). The unit will also turn on when the Play
49 or Open/Close 6B button is pressed.
2 Numeric Controls: Press these buttons to
select a specific track on a disc. The unit will
immediately search for the track and begin to play
it. For tracks 1 through 9 on a disc, you need only
press the desired number. For tracks 10 and
above, the second and third digit of the number
must be entered within two seconds of the first
digit. (See page 10 for more information.) These
buttons are also used to enter track numbers into
the memory for pre-programmed play lists. (See
page 13 for complete information on program-
ming the CD player.)
3 Program Button: Press this button to
begin the process of programming the CD player
to play the tracks on a disc in a specific order.
Once the button is pressed, enter each of the
desired track numbers in quick succession using
the Numeric Controls 2. When you have
entered the tracks to be played, press the Play
button 9 to begin the programmed sequence.
(See page 13 for complete information
on programming the CD player.)
8 REMOTE CONTROL FUNCTIONS
8:58
Side 8
4 Clear Button: Press this button to remove
selected or all tracks from the programmed
sequence. (See page 13 for complete information
on programming the CD player.)
5 Repeat Button: Press this button once to
repeat only the track that is currently being
played, and note that the REPEAT and ONE
indicators will light in the Information
Display. Press the button a second time so that
the REPEAT and ALL indicators are illuminated
to repeat all tracks on the disc. (See page 14 for
more information on Repeat Play.)
6 Repeat A
repeat a segment of the disc. Press the button
once to mark the start of the portion to be
repeated. Press it again at the end of the desired
sequence. The marked passage will play
continuously until the Stop button A is pressed.
(See page 14 for more information on Repeat Play.)
7 Skip Buttons: Press one of these buttons
to move to the next track fl·, or to move
back to the previous track ‡fi (See page 12).
8 Search Buttons: Press one of these
buttons to search forward — or backwards
‚ through a disc to locate a particular
portion of the selection being played. Holding
the buttons pressed for some seconds will
increase the search speed (see page 12).
9 Play/Pause Button: Press this button to
start the playback of a CD. If the CD drawer is
open, pressing this button will automatically
close the drawer. Press this button once during
playback to momentarily stop a disc. When the
button is pressed again, the disc will resume play
at the point it was stopped.
A Stop: Press this button to stop the disc
currently being played or to escape from the
program mode (see page 13 for complete
information).
B Button: Press this button to
›
B +10/-10 Buttons: Press the +10 button to
move to the 10th track after the current track
playing. Press the -10 button to move to the
10th track before the track currently playing.
C Random Button: Press this button to
have all of the tracks played in a random order.
(See page 10 for more information.)
D Time Button: Press this button to select
the time display. In normal operation, the display
will show the running time of a track being
played. Press the button once to check the time
remaining for the track in play. Press the button
a third time to view the elapsed time for the CD
being played, and a last time for the total play
time remaining for the disc in play (See page 11).
E Check Button: Press this button to check
the order of tracks programmed into the
CD player's memory. (See page 13 for complete
information on programming the CD player.)
F Open/Close: Press this button to open or
close the disc drawer. The drawer may also be
closed by pressing the Play button 4 9, or
by gently pressing the edge of the drawer.
However, we do not recommend pushing the
drawer, as damage to the transport mechanism
may result.
G Display Button: Press this button once to
dim the front panel display to half brightness.
Press it again to turn the display lights off com-
pletely. Another press will return the display to
normal brightness.
H Folder Buttons: Press the Folder + button
to move to the next folder with MP3 data, and
the Folder - button to move to the previous
folder with MP3 data.
I Info Button: Pressing this button
consecutive times shows the different CD Text
information available on a CD, or ID3 and other
information available on a disc with MP3 data.
To return to normal Track number / Time
indication press the Time button D. (See page
11 for more).
Advertisement
Table of Contents
