Harman Kardon FL 8385 Owner's Manual page 7

FRONT-PANEL INFORMATION DISPLAY
L HDCD Indicator: This indicator will light when a
disc encoded in the HDCD format is played. In order
to benefit from the FL 8385's HDCD decoding, the
Analog Audio Outputs ∞ must be connected to
corresponding inputs on your receiver or processor,
and those inputs must be selected. If you have only
connected the Coaxial Digital Audio Output ™ to
your receiver or processor, you will not hear HDCD
playback unless your receiver/processor includes an
HDCD decoder. Playback of non-HDCD-encoded
discs using the Analog Audio Outputs ∞ will be
enhanced due to the improved filters incorporated in
the FL 8385's microprocessor.
M Repeat Indicator: This indicator will light when
any of the four repeat modes described on pages 13
and 14 has been selected.
N Disc Mode Indicator: This indicator will light
when either the Random, All Tracks/Discs or Repeat
Disc modes has been selected.
O Single Mode Indicator: This indicator will light
when either the Random 1 disc or Repeat 1 track or
disc modes has been selected.
P Pause Indicator: This indicator will light when
playback has been paused.
Q All Mode Indicator: This indicator will light
when any of the Random All Sequential, Random
All Tracks/Discs or Repeat All Discs modes has
been selected.
R Play Indicator: This indicator will light during
playback.
FRONT-PANEL INFORMATION DISPLAY 7