Front-Panel Information Display - Harman Kardon FL 8385 Owner's Manual

FRONT-PANEL INFORMATION DISPLAY

Q
R P
A
A Random Indicator
B Sequential Indicator
C Disc Number Display
D Track Number Display
E Time Display
F Remaining Tracks Display
NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at
www.harmankardon.com.
A Random Indicator: This indicator will light when
any of the three Random modes described on page
12 have been selected.
B Sequential Indicator: This indicator will light
when the Random, All, Sequential playback mode has
been selected. The FL 8385 will play all tracks on the
current disc in random order, then advance to the next
available disc and play all of its tracks in random order,
and so on until all discs have been played once.
C Disc Number Display: The current disc number
will be displayed here.
D Track Number Display: The current track
number will be displayed here.
E Time Display: This indicator will display either the
total running time of the disc currently playing, the total
running time of the track currently playing or the time
remaining on the currently playing disc. See page 12
for more information on the Time Display E.
6 FRONT-PANEL INFORMATION DISPLAY
O M K
N L
B C D
G Total Time Indicator
H Program Indicator
I Remaining Time Indicator
J Intro Scan Indicator
K Loaded Disc Indicators
L HDCD Indicator
F Remaining Tracks Display: When a disc is first
selected, the numbers for each of the tracks on that
disc will light, up to 16 tracks. During playback the
current track number will flash, and all remaining
track numbers will remain lit. The numbers of the
preceding tracks will go dark. When playback is
stopped, all of the track numbers available on the
current disc will light, even if they were previously
played. If a disc contains more than 16 tracks, the
higher-numbered tracks may be played and their num-
bers will appear in the Track Number Display D
when selected, but those numbers will not appear in
the Remaining Tracks Display F.
G Total Time Indicator: This indicator will light
when the total time on the current disc has been
selected for display. See page 12 for more information
on the time display function.
H Program Indicator: This indicator will light when
the FL 8385 has been placed in programmed-play
mode. It will remain lit while a play list is being pro-
grammed and during playback of a play list.
I G
J
H
E
M Repeat Indicator
N Disc Mode Indicator
O Single Mode Indicator
P Pause Indicator
Q All Mode Indicator
R Play Indicator
I Remaining Time Indicator: This indicator will
light when the remaining time on the current disc or in
the current track has been selected for display. See
page 12 for more information on the time display
function.
J Intro Scan Indicator: This indicator will light
when the Intro Search mode has been selected as
described on page 13. This mode enables you to
search for a particular track by previewing the first 10
seconds of each track of each loaded disc, and then
selecting the desired track.
K Loaded Disc Indicators: When the unit is turned
on, the indicators for all disc positions will light, with
the current disc indicated by a flashing red ring. As the
FL 8385 circulates through all disc positions, the indi-
cators for positions found to be empty will go out. This
display will refresh any time the CD Drawer 5 is
opened.
F