Alfa Romeo Alfa 156 Sportwagon Q4 Manual page 22

– raise the boot mat and secure it as
shown in (fig. 7);
– loosen the clamping device (A-
fig. 8).
fig. 7
fig. 8
– take the tool container (B-fig. 8)
out of the boot and take it near the wheel
to be changed;
– take the spare wheel (C-fig. 8);
– take the compressor set (B-fig. 6)
out of the Fix&Go kit (it is not necessary
to use the small cylinder (C) containing
the sealing fluid);
– fit and then lock the compressor hose
(F) to the tyre inflation valve using the
A0B0687m
lever (E-fig. 9) provided for the purpose;
A0B0688m
fig. 9
– press the brake pedal, disengage the
gear, start the engine plug in the cigar
lighter (G-fig. 10) (or 12V outlet).
Inflate the tyre to the proper pressure
value (2.5 bar): for accurate reading use
gauge (H) to check for correct tyre infla-
tion pressure with compressor off. After
inflating the tyre, turn the engine off and
engage first gear or reverse;
WARNING
Do not use compressor
for over 20 minutes. Risk
of overheating.
A0B0746m
fig. 10
A0B0391m
21