Advertisement
Quick Start Guide
Panel Diagram & Dimensions
430mm
Installation Steps
Please check the following items before installation.
If anything is missing, please contact dealer.
•
•
•
Please follow the steps as below:
1. Turn off the power of the camera and display before installation.
2. Check if the cables and display device are occupied.
3. Connect monitor or DVR and BNC connector of the product over coaxial cable.
4. Connect the product push terminal UTP cable connector or RJ45 connector and
5. Check whether installation is correct, the device is good, make sure all
6. Make sure network is normal.
Troubleshoot
Please find the following solution when the device doesn't work:
•
•
•
•
•
•
•
•
3
AHD, CVI and TVI 4 Channel Passive Video Balun
Coax Port
1x HDUB4P
1x Accessory Set
1x User Manual
camera output port over UTP cable.
connection is reliable, connect power cable, system is power on.
Check if it's according to the manual.
If choose RJ-45,make sure both ends of UTP cable are same (both 568A or both
568B).
If choose green terminal block,make sure cable of same colour be in the same
pin.
Check all connection(like BNC,RJ-45).
Make sure the real distance not exceeds the allowed transmission distance.
Make sure the cables are quality.
Replace the device at question by a normal working device.
If the problem still exists, please contact your distributor.
RJ45 Port
Terminal Block Port
Advertisement
