Troubleshooting - Harman Kardon HK695 User Manual

Troubleshooting: harman/kardon Champagne HK695 Audio System
Back to Contents Page
Troubleshooting: harman/kardon HK695 Audio System

Troubleshooting

Getting Help
•
Troubleshooting
SYMPTOM
No sound from Speakers
file:///D|/HK695/trouble.htm (1 of 3)11/16/2004 3:53:09 AM
POSSIBLE
PROBLEM
No power to unit.
Is the control/right
satellite of your HK695
Audio system plugged in
correctly?
SOLUTION
Make sure wall power
outlet or power strip has
power. Make sure all
switches for outlet/power
strip are on and that all
switches for speaker
system are on.
Toggle the power switch.
Replace the fuse. The
fuse holder is on the back
of the subwoofer between
the power cord connector
and the power switch. Use
a screwdriver to turn a
quarter turn in the
direction indicated by the
arrow. A spare fuse was
supplied with the product,
attached to the AC cord.
See the specification
section for a description of
the fuse
Ensure that the control
speaker connector is
pushed in properly.
Remove the control/right
speaker connector from
the subwoofer, then re-
connect this cable
ensuring that the
connector is pushed in
properly.
NOTE
Check green power LED
on the sub. If the sub's
LED is not on, power is
not getting to your
speaker system. Try the
solutions shown.
WARNING!
Unplug the speaker
system from the electrical
outlet before replacing the
fuse.
There is an LED located
in the top of each of the
two satellite speakers.
These should both be lit.
If they are, your speakers
are both plugged in
correctly.