Napoleon Ascent 36-1 Installation And Operation Manual page 54

fi nishing
EN
Holes under log
(not illustrated).
1. Place the holes in log #1 on A1 and A2.
Ensure the notch fi ts around the pilot shield.
Holes under log
(not illustrated).
1
2
3. Place the holes in log #3 on C1 and C2. Do not
cover any burner ports.
NOTE: Place glowing embers on the burner, in front of the large clusters of ports (not illustrated). The burner has
been designed to have large fl ames in these locations. If not, blue fl ames will be present.
4
2
5. Place the hole in log #5 on D1. Place the
opposite end on the notch in log #3.
54
W415-2835 / 01.16.20
1
Notch
A1
A2
3
C1 C2
Hole under log
(not illustrated) d)
Notch Notch
1 1
5
D1
Holes under log
(not illustrated).
2
B2
B1
2. Place the holes in log #2 on B1 and B2. Do not
cover any burner ports.
Holes and notch
not illustrated.
4
2
4. Place the locator on log #4 into the hole in log
#2. Place the opposite end on the notch in log
#1.
4
2
6
6. Place the bottom of log #6 against the edge of
the media tray. Ensure the top branch engages
with the left end of log #3.
7. Cover the media tray with charcoal as desired
(not illustrated). Ensure charcoal is not on
burner pan.
1
1 1
3
Top Branch
1
3
5