Table of Contents
Advertisement
3. Press the
button
i ˜
Set
4. Adjust the delay time by pressing the
buttons
on the remote or
g
⁄
¤
/
the
buttons
¸
Selector
panel until the delay time figure cal-
culated using the formula entered
above appears in the display.
5. If no adjustment is needed for
the center channel delay, press the
button
to enter the
i ˜
Set
setting into the AVR65's memory.
If the calculations outlined above
for the center channel delay require
an adjustment, proceed with the
following steps:
6. Select a digital input by pressing
the
button
w ˆ
Digital
the
buttons
on the remote
g
⁄
/
¤
or the
buttons
Selector
front panel until either
COAX
appear in the
OPTICAL
Information Display U
the on-screen display. Note that for
this adjustment, either input may
be selected.
AVR65 120 volt Rev (C) 10/6/98
System Configuration
.
7. Press the
Set
8. Select the Dolby Digital mode either
by pressing the front panel
on the front
Digital Selector (
the
Surround Mode Selector y
on the remote, and then pressing the
buttons
⁄
/
¤
until
DOLBY AC-3
the
Main Information Display U
or in the on-screen display. Ignore
any "
NO DATA
may appear.
9. Press the
Delay
the remote or front panel. The words
S DELAY TIME
Main Information Display U
. Press
10. Press the
remote once, so that
on the
appears in the
¸
TIME
or
Information Display U
in the on-screen display.
Main
or in
22
button
.
i ˜
Dolby
or by pressing
on the remote
g
appears in
" message that
button
on
v ı
appears in the
.
buttons
g
on the
⁄
/
¤
C DELAY
Main
or
11. Press the
button
i ˜
Set
12. Press the
buttons
g
⁄
¤
/
the remote until the desired delay
time for the center channel appears
in the display.
13. Press the
button
i ˜
Set
the setting into the AVR65's memory.
Congratulations! You have now completed
the setup, adjustment and calibration of
the AVR65. You are now ready to enjoy the
finest in music and home theater listening.
.
on
to enter
Hide quick links:
Advertisement
Table of Contents
