Pressure Control Transducer Removal - Graco Mark IV 249636 Operation - Repair - Parts

Pressure Control Transducer Replacement

Pressure Control Transducer Removal

1 Remove four screws (38)
and cover (96).
1
1
46
2 Disconnect transducer
connector from motor
control board (95).
2
2
3 Remove four screws (39)
and control box (61). Allow
control panel to hang down
freely.
3
3
Repair
4 Remove grommet from
control box Remove
transducer (86) and o-ring
(20) from filter base (67).
4
4
311287A