Table of Contents
Advertisement
Spray
1 Spray test pattern. Adjust pres-
sure to eliminate heavy edges.
Use smaller tip size if pressure
adjustment can not eliminate
heavy edges.
Note: Example shown is for air-
less paint. Other materials may
be different
1
1
14
2 Hold gun perpendicular,
10-12 in. from surface. Spray
back and forth. Overlap by
50%. Trigger gun before moving
and release after moving.
2
2
Clear Clog
1 Release trigger, put safety ON.
Rotate SwitchTip. Take safety
OFF. Trigger gun to clear clog.
Never point gun at your hand or
into a rag!
3
3
Startup
2 Put safety ON. Return
SwitchTip to original position.
Take safety OFF and continue
spraying.
4
4
311287A
Advertisement
Table of Contents
