Table of Contents
Advertisement
5
Hold gun against grounded
metal flushing pail. Trigger
gun and increase fluid pres-
sure to 1/2. Flush 1 minute.
5
5
311287A
Inspect for leaks. Do not stop
leaks with hand or a rag! If leaks
occur, do Pressure Relief.
Tighten fittings. Do Startup, 1. -
5. If no leaks, proceed to 6.
6
Place pump in paint pail.
6
6
Startup
7
Trigger gun again into flush-
ing pail until paint appears.
Move gun to paint pail and
trigger for 20 seconds. Set
gun safety ON. Assemble tip
and guard, page 13.
7
7
11
Advertisement
Table of Contents
