Hyundai stargazer 2022 Owner's Manual page 63

Securing a Child Restraint System
with "Top-tether anchorage" system
(if equipped)
Top-tether anchorages for Child Restraint
Systems are located on the floor of the
luggage room.
WARNING
Take the following precautions when in-
stalling the top-tether:
• Read and follow all installation in-
structions provided with your Child
Restraint System.
• NEVER attach more than one Child
Restraint System to a single top-teth-
er anchorage. This could cause the
anchorage or attachment to come
loose or break.
• Do not attach the top-tether to any-
thing other than the correct top-teth-
er anchorage. It may not work prop-
erly if attached to something else.
• Child Restraint System anchorages
are designed to withstand only those
loads imposed by correctly fitted
Child Restraint Systems. Under no cir-
cumstances are they to be used for
adult seat belts or harnesses or for at-
taching other items or equipment to
the vehicle.
To install the top-tether :
1. Route the Child Restraint System
top-tether over the Child Restraint
OKS032042L OKS032042L
System seatback. Route the top-tether
under the headrest and between the
headrest posts, or route the top-tether
over the top of the vehicle seatback.
Make sure the strap is not twisted.
2. Connect the top-tether to the top-teth-
er
top-tether according to the instruc-
tions of your Child Restraint System's
manufacturer to firmly attach the Child
Restraint System to the seat.
3. Check that the Child Restraint System
is securely attached to the seat by
pushing and pulling the seat forward
and from side-to-side.
anchorage, then
03
OKS032043L OKS032043L
tighten the
3-37