Range Safety; Electrical Specifications For Power Supply; Range Installation - Whirlpool LWF5370 Instructions Manual, Installation And Use Manual

Congratulations for your new appliance!
You just purchased a new appliance, designed and manufactured following the most advanced techniques, Whirlpool guaranteed!
We strongly recommend you to read the instructions on this manual before using your range. Please keep this literature in a safe place for
further reference; it will help you to keep your range in good conditions for years.
We have provided many important safety messages in this manual and your appliance. Always read and obey all safety
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.
Don't store gasoline or other
flammable liquids close from
your appliance.
Make sure the cabinets and
other furniture surrounding your
range as well as the wall and
floor withstand temperatures of
180°C to avoid deformations
and damage.

This gas range is equipped with a grounded plug for your safety. The wall outlet should be grounded.

Reset all components before starting the product.

Unplug the range or turn off the power supply before giving maintenance to the range.

Don't cut or remove the grounded plug from the cable.

If the power supply cord is damaged it must be replaced by the manufacturer, contact Whirlpool
service center.

Don't use cable extension or an electrical jack connector.

Do not have wet hands when plugging or unplugging your appliance.

Move this appliance only with the help of two or more people.

Don´t allow children or other inexperienced person to operate the range.

If you need maintenance or replace parts to the appliance please contact the Whirlpool service.

Electrical Specifications for Power Supply

Voltage: 105-140 V ~

Keep this document for future reference.

The correct installation of this appliance is your responsibility, we strongly recommend you to have a qualified
technician or Whirlpool Service Technician to install your new range.
14-Sep-2015 11:56:11 EDT | RELEASED

Range safety

Your safety and the safety of others are very important.
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word
"DANGER" or "WARNING". These words mean:
You can killed or seriously injured if you don´t immediately follow instructions.
You can be killed or seriously injured if you don´t follow instructions.
For your safety:
IMPORTANT SAFETY INSTRUCTIONS
Frequency: 50/60 Hz

Range Installation

In some European factories the letter "W" of the part code mentioned herein will be automatically
S DE SEGURIDAD
For your safety:
If you smell gas
Open the windows.
Don´t touch the electrical switches.
Turn off all flames by turning of the valve of
the gas supply line.
Contact your gas supply provider company
immediately.
Don´t use your range to warm up the room,
it's dangerous.
Current: 1.0 A Max
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
17
15