Harman Kardon AVR 130 Owner's Manual page 20

SYSTEM CONFIGURATION
3. When the desired mode name appears in the
Lower Display Line ¯, press the Set Button
o@.
4. Pause five seconds until the unit "times out" and
returns to normal operation. This is your indication that
the connection between the input source and process-
ing mode has been entered into the system memory.
5. Repeat the process as shown in steps 1 through 4
for any additional inputs you wish to program for a
specific surround or processing mode.
Once the settings outlined on the previous pages have
been made, the AVR 130 is ready for operation. There
are some additional settings that may be made if
desired, but these are best done after you have had
an opportunity to listen to a variety of sources and dif-
ferent kinds of program material. These adjustments
are described on page 26 of this manual. In addition,
you may change any of the settings made in the initial
configuration at any time. As you add new or different
sources or speakers, or if you wish to change a setting
to better reflect your listening tastes, simply follow the
instructions for changing the settings for that parame-
ter, as shown in this section.
Having completed the setup and configuration process
for your AVR 130, you are about to experience the
finest in music and home theater listening. Enjoy!
20 SYSTEM CONFIGURATION