Using Your Mixer - Hamilton Beach 64694 User Manual

840107200 ENv02.qxd 11/25/02 10:46 AM Page 5
Optional Features
Mixing Shield
1. To attach: Place small tabs on the
the groove around the mixer.
2. Now insert the beaters or other
attachments and use the mixer
as you normally would.
3. To remove: Turn mixer off and
unplug. Eject beaters or other
attachments.
4. Grasp mixing shield in one hand,
5. Wash mixing shield in hot, soapy
water. Rinse and dry.
Mixer Lockdown Button
Use this feature to lock the mixer in
the "down" position when using on
the stand.

Using Your Mixer

1. Always make sure mixer is
unplugged and speed control is set
on OFF. Insert beaters. Use as hand
mixer or assemble on stand.
2. Plug mixer into electrical outlet.
(Available on selected models)
Power Boost
Press and hold down the button for
mixing shield
Power
into grooves on
Burst
side of mixer.
Push the
shield back
onto the mixer.
The mixing
shield will snap
Bowl Rest
into place in
This feature can be used on most large
while holding
mixer in other
CAUTION:
hand. Pull
• Never use Bowl Rest when mixer is on.
shield straight
• Do not use Bowl Rest on small
out, then up,
(1 1 ⁄
to remove.
mixing bowls.
Shift and Stir™ Bowl Lever
Use the lever to move the turntable.
This allows you to position the beaters
near the edge of the bowl or in the
center.
3. Move the speed control to desired
speed, starting at 1 and increasing
to a higher speed as necessary.
4. If using as a stand mixer do not
leave mixer unattended. Always
monitor the progress of the mixing.
additional power
at any speed.
NOTE: Never use
Power Burst
for more than
two minutes at
a time or motor
may overheat.
™
mixing bowls.
Use the Bowl
Rest while adding
ingredients or
checking a
recipe. To use,
TURN MIXER
OFF, then set
the mixer on the
edge of the bowl.
quart) mixing bowls or plastic
2
5