Advertisement
System Mounting
Step 1: Attach system mounting
to wall stud
Operation and Maintenance
•
The PeakFlow A system is a completely salt-free system.
•
Scale prevention media needs to be replaced every 3 years.
•
If the System sizing recommendations have been followed, the PeakFlow A media should last two years.
•
Only PeakFlow A System media can be used.
•
The use of any other replacement media will void the warranties and may compromise equipment protection, water
quality, and equipment life.
•
The filters should be changed 36 months after installation and at least 36 months after the last filter change. The
frequency of cartridge replacement will depend on volume of system usage.
Media Replacement Procedure
1.
Turn off all of the equipment connected to the PeakFlow A System before shutting off the water supply from the filters.
2. Shut off the water supply at the front end of the system.
3. Disconnect the plumbing line from the inlet and outlet.
4. Unscrew the head from the fiber glass tank. Then remove the distributor tube.
5. Remove the filter media by tipping the tank upside down into a large drum or pail.
T
H
E
L
E
A
D
Step 2: Place PeakFlow A
to system mounting
E
R
I
N
C
O
PeakFlow
Installation Instructions
N
D
E
N
S
I
N
G
A System
®
Step 3: Secure PeakFlow A
to system mounting
T
E
C
H
N
O
L
O
G
Y
Advertisement
