Qilive Q.6598 Instruction Manual page 28

Problem Possible causes
The dishes Not enough detergent was
are not dispensed.
clean.
Items are blocking the movement
of the spray arms.
The filter combination is not clean
or is not correctly fitted in the base
of wash cabinet. This may cause
the spray arm jets to get blocked.
Cloudiness Combination of soft water and too
on glass- much detergent.
ware.
White spots Hard water area can cause
appear on limescale deposits.
dishes and
glasses.
Black or Aluminium utensils have rubbed
grey marks against dishes.
on dishes
Detergent Dishes block detergent dispenser. Re-load the dishes properly.
left in dis-
penser
The dishes Improper loading.
are not
Dishes are removed too soon.
drying
Wrong program has been selected. With a short program, the washing temperature
Use of cutlery with a low-quality
coating.
What to do
Use more detergent, or change your detergent.
Rearrange the items so that the spray can
rotate freely.
Clean and/or fit the filter correctly. Clean the
spray arm jets.
Use less detergent if you have soft water.
Select a shorter cycle to wash the glassware.
Add more detergent.
Use a mild abrasive cleaner to eliminate those
marks.
Load the appliance.
Do not empty the appliance immediately after
washing. Open the door slightly so that the
steam can come out. Take out the dishes until
the inside temperature is safe to touch. Unload
the lower basket first to prevent the dropping
water from the upper basket.
is lower, decreasing cleaning performance.
Choose a program with a long washing time.
Water drainage is more difficult with these
items. Cutlery or dishes of this type are not
suitable for washing in the appliance.
28