Panasonic VL-MC3000BX Operation Instruction Manual page 7

Press this key to enter the message
Message
function.
Press this key to enter the settings
Settings
function.
Network Displays whether the device is connec-
Status ted to the network.
Displays whether the device is in the
absent arm, home arming or disarming
Arming
status.And the default password is
Status
123456.
bar
Displays the device is in the privacy sta-
Privacy
tus, click on this key to perform privacy
setting.
Device Press this key to enter the clean functi-
Cleaning on.
5.2 Description of video intercom function
The device will display the ring interface automa-
tically when receiving a call. The user can accept
or decline the call, unlock the door, and adjust
Intercom
the ring tone volume/intercom volume. the user
can also take a screen shoot in intercom functio-
n. A residence can be registered up to 6 monitors
Click on [Dial plate] button and enter the numbe-
Call
r of a neighbor to be called. Then press the [Call]
neighbors
button to start the call.
The user can click on the [Center] button in the
main interface to call the guard station in the
Call
management center. User can also click the [Cen-
Center
ter] button in the video intercom function to call
center.
Click on the [Contacts] button in the video interc-
om function, and then the user can check contac-
Contacts
ts of the device. On the contacts interface, the
user can click on a certain number to perform video
intercom.
User can check intercom logs in the video interc-
om function to check recent intercom logs. In
Check
the records, the user can click on a certain record
intercom
to check details info. And in details info interface,
logs
the user can play the messages, call back, delete,
or mark the number in the blacklist.
The user can click on the [Blacklist] button in the
video intercom function to check the numbers
Blacklist
marked in the blacklist. The user can also add new
number or delete the number from the blacklist.
5.3 Description of security function
Press and hold the [SOS] key on the main interfa-
SOS ce for 2 seconds to trigger the SOS function. Then
a SOS info will be sent to the property center.
Click on [Setting] on the [Security] interface to
set the arm status of the device. There are [Arm],
[Home Mode] and [Disarmed] options for selecti-
Arm and
on. After a certain mode is selected, it may need
disarm
to enter the user's password.
For user's password, refer to the relevant descrip-
tion of [Parameter setting].Default is 123456.
After an alarm sounds, the device will automatic-
ally display the alarm interface and the user can
Alarm and
enter the user password to cancel the alarm.
cancel
For user's password, refer to the relevant descrip-
tion of the [Parameter setting].
11 12