Samsung UN KS8500F Series Service Manual page 58

3. Disassembly and Reassemble
Description
3
Insert the Open Jig tool into left bottom
side of the rear cover and following
directions →
1
4
Gently lift up the Rear Cover from the
bottom corners to release all mounting
clips as indicated by Red Rectangles .
Do not damage on double-sided tape
located at the edge of the top side.
3-2
→
2
3
Picture Description
Open Jig
If you cannot open, find the locking point
HOOK
Locking part
2
1 3
JIG
disassembling
Press
SET
Screws