Samsung KS7D Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. TV
  5. KS7D
  6. Service manual
Samsung KS7D Service Manual

Samsung KS7D Service Manual

Color television receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE
COLOR TELEVISION RECEIVER
COLOR TELEVISION RECEIVER
Chassis
: KS7D(N)_Timecop
Model
: CL29Z30PQTXXAX
Manual
CL-29Z30PQ
FEATURES
GREEN CRT
■
■
■ Turbo Voice

Advertisement

Table of Contents
loading

Related Manuals for Samsung KS7D

Summary of Contents for Samsung KS7D

  • Page 1: Service Manual

    COLOR TELEVISION RECEIVER Chassis : KS7D(N)_Timecop Model : CL29Z30PQTXXAX SERVICE Manual COLOR TELEVISION RECEIVER FEATURES GREEN CRT ■ ■ ■ Turbo Voice CL-29Z30PQ...
  • Page 2 © Samsung Electronics Co., Ltd. Apr. 2006 This Service Manual is a property of Samsung Electronics Co.,Ltd. Printed in Korea Any unauthorized use of Manual can be punished under applicable AA82-03373A International and/or domestic law.

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 Precaution ■ 1-1 Safety Precautions ............1-1 ■...
  • Page 4 Chapter 9 PCB Diagram ■ 9-1 Main Board ..............9-1 ■...
  • Page 5 COLOR TELEVISION RECEIVER Chassis : KS7D(N)_Timecop Model : CL29Z30PQTXXAX SERVICE Manual COLOR TELEVISION RECEIVER FEATURES GREEN CRT ■ ■ ■ Turbo Voice CL-29Z30PQ...
  • Page 6 © Samsung Electronics Co., Ltd. Apr. 2006 This Service Manual is a property of Samsung Electronics Co.,Ltd. Printed in Korea Any unauthorized use of Manual can be punished under applicable AA82-03373A International and/or domestic law.
  • Page 7 Table of Contents Chapter 1 Precaution ■ 1-1 Safety Precautions ............1-1 ■...
  • Page 8 Chapter 9 PCB Diagram ■ 9-1 Main Board ..............9-1 ■...

  • Page 9: Product Specification

    - VCT4822_F1: Sound Processor, Video Processor, Display and Deflection Processor Controller, OSD and Text Processing - TDA7297SA : Sound Signal Amplify - STR-X6750F: Power Supply HIC - TDQ-6F/13F2S (Tuner): RF signal processing , output IF signal - TECCIO4OSL32A(E) : 2Tuner-PIP Main tuner - TMQH2-003A,2 Tuner-PIP Sub tuner Samsung Electronics...

  • Page 10: Key Features

    - Rear: 2 AV Input & Component video share 1 Component Input : 480i, RF 1 Input 1 AV Output ■ Remocon - TM85 ■ Power Supply - 100V ~ 240V, (Mexico : 120V) ■ Power Comsumption - Standy-by: Less than 2.6W - Standard Power: 140W Samsung Electronics...

  • Page 11: Specifications Analysis

    Product Specification 2-3 Specifications Analysis Model CL29M6PQ CL-29Z30PQ Chassis KS7A KS7D Design Screen Size 29" 29" FLAT SLIM-FIT DNIe Jr. ■ Comb Filter Velocity Modulation Picture Video Noise Reduction Auto Kinetic Bias Color Tone Control Tilt Control Picture Mode 4 Mode...
  • Page 12 Product Specification 2-4 Accessories Accessories Item Item code Remark Remote Control AA59-00384A AAA Alkaline Battery (2) 4301-000103 Samsung Service Owner's Instructions AA68-03806A center Safety Guide Manual AA68-03242F Warranty Card BN68-00797A Registration Card BP68-00515A Video Cable / Audio Cable S-Video Cable...

  • Page 13: Chapter 1 Precaution

    When Check the AC power cord for possible damages. Keep voltage exceeds the specified limits, check each special the part or the lead away from any heat-emitting part. materials. Samsung Electronics...
  • Page 14 Critical safety parts should be bracketed with ( Use only regular parts for replacements (in particular, flame resistance and dielectric strength specifications). Irregular parts or materials may cause electric shock or fire. Samsung Electronics...

  • Page 15: Servicing Precautions

    5. Check for insulation between the blade of the AC plug 10. The sharp edges of the metal material may cause and that of any conductive materials (i.e. the metal physical damage, so ensure wearing protective gloves panel, input terminal, earphone jack, etc). during the repair. Samsung Electronics...

  • Page 16: Static Electricity Precautions

    These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Samsung Electronics...

  • Page 17: Installation Precautions

    5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric shock. Samsung Electronics...
  • Page 18 MEMO Samsung Electronics...
  • Page 19 Reference Information 14. Reference Information 14-1 Option Byte Samsung Electronics 14-1...

  • Page 20: Technical Terms

    Audio Multimix provides 2 languages for audio when broadcast- ing a foreign movie, drama, news, etc. You can select and lis- ten to one of the supported languages or you can select and listen to both languages simultaneously. 14-2 Samsung Electronics...

  • Page 21: Overall Block Description

    * Micom Block consists of five aspects as: Video & Sound IF Processor,Sound Processor, Video Processor, Display and Deflection Processor and Controller, OSD,Text Processing. * TDQ-6F/13F2S (Tuner): RF signal processing, output IF signal. Samsung Electronics 13-1...

  • Page 22: Partial Block Description

    * EEPROM: As a extended ROM of TVT. It contains some data which is used to program executing. * STR W6750F: SMPS control HIC. Provide switching signal in order to control the trans working. * TDQ-6F/13F2S(TUNER): Receives the RF signal and output a fixed IF to Micom. 13-2 Samsung Electronics...
  • Page 23 B+5V IC802(78R05) IC802(78R05) 130V 130V B+5V B+5V ± 16.5V ± 16.5V Vertical AMP Vertical AMP B+33V B+33V TUNER TUNER Q813(KSC2331-Y) Q813(KSC2331 - Y) B+8V B+8V B+210V B+210V Video AMP Video AMP SCREEN SCREEN FOCUS FOCUS HEATER HEATER Samsung Electronics 13-3...
  • Page 24 Vertical DEF. LA78045,SANYO Horizontal DEF. 2SC5936M,MATSUSHITA SOUND AMP TDA7297SA, SGS-TOMSON 10W+10W SOUND AMP TDA7266SA, SGS-TOMSON 7W+7W EEPROM 24C161,SAMSUNG VIDEO AMP TDA6109JF, Philips Regulator 78R05 B+5V Regulator Regulator 78RM33 A+3.3V Regulator Regulator KSC2328A-Y A+5V Regulator Regulator KSC2331-Y B+3.3V Regulator 13-4 Samsung Electronics...

  • Page 25: Chapter 3 Alignment & Adjustment

    It is recommended using an insulation transformer when supplying power to the set so as to prevent shock to the set or to yourself. ■ These adjustment specifications have been created on the basis of the domestic KS7D chassis-applied remote control model. Some of the contents may be changed subject to the sales location and the product specifications.

  • Page 26: How To Access Service Mode

    TEST PATTERN EEPROM BUS STOP CHCKSUM RESET G2 ADJUST 3. Functions of the Keys within Service Mode MENU Show all menus Move the cursor to select an item. ▲ / ▼ Adjust the selected configuration value ◀ / ▶ Samsung Electronics...

  • Page 27: Factory Data

    CL-29Z30MQ V Amp V Shift H EW H Shift V Linearity V SC H Parabola Upper Corner Lower Corner Upper Corner6 Lower Corner6 H Trapezium Angle EHT Time EHT Threshold EHT Vertical EHT Horizontal EHT Vertical2 EHT Horizontal2 Samsung Electronics...
  • Page 28 CL-29Z30MQ V Amp V Shift H EW H Shift V Linearity V SC H Parabola Upper Corner Lower Corner Upper Corner6 Lower Corner6 H Trapezium Angle EHT Time EHT Threshold EHT Vertical EHT Horizontal EHT Vertical2 EHT Horizontal2 Samsung Electronics...
  • Page 29 Alignment & Adjustment 0 V-AMP H-Parabola 1 V-Shift Upper Coner 2 H EW Low Coner 3 H-Shift H-Trapezium 4 V-Linearity 10 BOW 5 V SC 11 Angle Samsung Electronics...
  • Page 30 CL-29Z30MQ R Cutoff G Cutoff B Cutoff R Drive G Drive B Drive Sub Bright Sub Contrast Sub Color Sub Tint AKB Option BCL Threshold BCL Gain BCL Time Sub Sharpness Pilot Low Pilot High V-Mute(x100ms) BCL TCUP Samsung Electronics...
  • Page 31 Item Remark CL-29Z30PQ CL-29Z30MQ Melody Volume HB Start HB Stop RF AGC VM Gain VM Delay V Peaking BLE Tilt BLE Gain BLE Mode BLE Break CTI Gain CTI Coring LTI Gain D-EHT Time DCT Ratio VSP COMB Samsung Electronics...
  • Page 32 PIP NTSC V.Pos PIP H.Pos PIP R Cutoff PIP B Cutoff PIP R Drive PIP B Drive 6. YC Delay 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ PAL Delay SECAM Delay NTSC Delay PAL(AV) Delay SECAM(AV) Delay NTSC(AV) Delay Samsung Electronics...
  • Page 33 Alignment & Adjustment 7. Test Pattern 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ G2 Adjust Read Cut Read Drive IBRM WDRM COLR G B 50 / 50 / 50 50 / 50 / 50 Samsung Electronics...
  • Page 34 TTX V Position TTX H Position TTX Contrast TTX Brightness OSD Contrast OSD Brightness Double TTX H Position Standard Equ100(Std BASS) Standard Equ300(Std TREBLE) Standard Equ1K(Music BASS) Standard Equ3K(Music TREBLE) Standard 10K(Movie BASS) Music Equ100(Movie TREBLE) Music Equ300(Speech BASS) 3-10 Samsung Electronics...
  • Page 35 PIP G CUTOFF PIP G DRIVE OSD/PIP BRIGHT BALANCE PIP BRIGHT OFFSET MDB_STRENGTH MDB_HARMONIC MDB_HP MDB_LP MDB_LIM MDB_CUTOFF EHT POSITION 1 EHT POSITION 2 3.4CH SLLTHD (TV-NO NOISE) CH SLLTHD (TV-NO NOISE) LNA Operating Point SLLTHDV(TV NO NOISE) Samsung Electronics 3-11...
  • Page 36 Remark CL-29Z30PQ CL-29Z30MQ LNA Default LNA SWITCH LMIXOFS H-OUTDEL CR-P Initial CR-I Initial DRX_CR_AMP_TH Over Modulation Return Counter VCR Mode Counter "VID_AMP_HEAD_BS(In the modula- tion)" CR_P (In the Over Modulation) "THRSEL(picture shaking when weak signal)" SLLTHDVP EEP_BC_MIN_LIMIT 3-12 Samsung Electronics...
  • Page 37 2RCA+S+DVD 2RCA+S+DVD Tilt Vchip Caption 2-Tuner Auto On StandBy LED Philippines(AV MULTI) Osd Language English English FM Radio Antenna Disp Hi-Deviation Plug & Play DNIe Jr Volume Curve Small Small Color Matrix Japan Japan PWM/Parabola Parabola Parabola Samsung Electronics 3-13...
  • Page 38 Alignment & Adjustment 11. White Balance 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ 269± 3/274± 3/40± 0.3 269± 3/274± 3/40± 0.3 269± 3/274± 3/2.0± 0.2 269± 3/274± 3/2.0± 0.2 3-14 Samsung Electronics...

  • Page 39: Service Adjustment

    3-4 Service Adjustment 3-4-1 Adjusting the Picture Size ■ Since the KS7D chassis has the deflection settings data within the Factory Data, the picture size has to be adjusted when replacing Main Board, according to the following procedures. ① Display the Lion pattern.
  • Page 40 Upper Coner 4 V-Linearity Low Coner 5 V SC ⑦ When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed. If there is no change, finish the adjustments. 3-16 Samsung Electronics...

  • Page 41: Replacements & Calibration

    3-5-1 Adjusting the Focus 1. Display the Cross Hatch pattern. 2. Turn the Focus clockwise to the optimal position. 3. Slowly turn the Focus clockwise so that the cross line is the most clearly displayed. After Adjustment Focus Samsung Electronics 3-17...
  • Page 42 1. Select "Power Off → Mute → 1 → 8 → 2 → Power On" to enter Service Mode. 2. Display the Toshiba pattern. Screen 3. Use remocon come into "G2 Adjust" mode by hand. 4. Turn Screen VR of FBT and confirm the characters below changed from RED to GREEN. 3-18 Samsung Electronics...
  • Page 43 4. When the adjustment is finished, check the following checklist. - If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again. - If there is a ghost line on the screen, adjust the Screen Voltage again. Samsung Electronics 3-19...
  • Page 44 MEMO 3-20 Samsung Electronics...

  • Page 45: Checkpoints By Error Mode

    2) Check that the Tact Switch has been pressed. 3) Check that the signal cable is properly connected. 4) Check that channel setting has been set. ■ When the picture is abnormally displayed on the screen, display the Test pattern and check the adjustment status. Samsung Electronics...
  • Page 46 When the screen is not properly displayed and the left or right side of the picture is shrunk, or the top or bottom of the screen is expanded or shrunk, check if the Deflection Blcok is out of order. Samsung Electronics...

  • Page 47: Troubleshooting Procedures By Error Modes

    If you press the power switch of the or the channel key on the remote control when in St-BY sta- tus, the screen will be turned on. ○→◑ If the LED blinks and the screen is not displayed, check the connection between the Power and the Main Board. Samsung Electronics...

  • Page 48: Troubleshooting Procedures By Ass'y

    (25, 43, 72Pin : 3.3V, 70Pin : 5.0V) 2. NO Video Heater Voltage Check R418, R516 Check V999S Heater 6.0~6.3 Vcc Video B+ Check (IC501 6PIN) IC501 Check : 180V~210V ICV201 Check IC301 Check IC301 Supply Voltage Check : +16.5V, -16.5V Samsung Electronics...
  • Page 49 IC602 Problem → Change ICV201 Problem → Change 4. Fly Back Lion Badness Video B+ Check (IC501 6PIN) IC501 Check : 180V~210V ICV201 Problem → Change FD801S IC804 IC801S IC601 FP801S Power cord IC901 ICT501 IC201S T401 TU01S IC301S QE01 Q401 Samsung Electronics...

  • Page 50: Troubleshooting By Blocks

    The RF / CTV signal is transmitted to the Tuner of the Main Board. If the signal is not received, check the following items. - Power supply: 5V, 33V - Check for RF defects: Check the IF output - Check for AUDIO defect: Check the SIF Signal output Samsung Electronics...
  • Page 51 Troubleshooting 2. Micom Diagnosis VSP/MSP/DRX Block ETC - Power supply: 3.3V, 5V, 8V - Check for input defects: Y/C(CVBS, S-VHS), 480i Y/Pb/Pr signal Samsung Electronics...
  • Page 52 The signals are sent to VCTI and the selected signals are output. If the signal input or output does not work, check the following items. - Check for input defects: Check the Micom input pin. - Check for output defects: Check JAR701 (for RF/AV) or JA701(for comp/S_VHS) Samsung Electronics...
  • Page 53 This receives the signal from the Audio Processor (VCTI) and outputs the signal in7W+7W / 10W + 10W sound. - Power supply : 14V - Check for input defects : AMP-R,AMP-L - Check for output defects : L+, L-, R+,R- Samsung Electronics...
  • Page 54 If the voltage is measured, the problem is a defect in the FBT unit. (When you don't have an oscilloscope, and you can hear the high-voltage sound, you can determine that the horizontal TR is normal.) - Is the vertical input waveform output from the VCTI VDP Pin. 6-10 Samsung Electronics...
  • Page 55 ② Tap the upper part of the Back Cover 2 or 3 times and pull the Back Cover to separate it from the unit. : Disassemble the product after disconnecting the power cord and discharge the unit to prevent an electric shock and damage to the product due to static electricity. Samsung Electronics 12-1...
  • Page 56 ① Separate the Side AV Wire from the Front Cabinet and the Main Board. ② Pull Holder Chassis like the picture arrowdirection. ① Separate the Control 4P Wire,6P Wire,Speaker Wire from the Front Cabinet and the Main Board. 12-2 Samsung Electronics...
  • Page 57 Disassembly & Reassembly Part Name Description Description Photo Chassis ① Separate the Power cord,D-COIL,TILT,DY connector from Holder Main Board ① Remove the screw. Samsung Electronics 12-3...
  • Page 58 : Take care when separating the wires because pulling the wires by force may damage the socket. In addition, separate the wires on a flat and clean surface so as to prevent scratching of the material and the PCB. 12-4 Samsung Electronics...
  • Page 59 Disassembly & Reassembly 12-1-4 Disassembling the Main Board Part Name Description Description Photo Main Board ① Separate the cable from the Main Board. ① Separate the cable from the Main Board. Samsung Electronics 12-5...
  • Page 60 MEMO 12-6 Samsung Electronics...
  • Page 61 BP64-00331B DECORATION-POWER PJTV,ABS,HB,GR503,SVM30 S.N.A CIS7 AA61-60003J SPRING ETC-CS -,SUS304,-,-,OD6,N7,OD6,-, S.N.A M0006 AA63-01170B COVER-REAR 29Z30,HIPS,T3.0,HB,BLK,SAMEX, M0014 AA94-15816A ASSY PCB MAIN ,KS7D,TIME COP M0112 AA63-01167P COVER-FRONT 29Z30,HIPS,HB,GR503,SV012P+B S.N.A T0003 AA96-03383P ASSY COVER P-FRONT 29Z30,XAX,HIPS HB,GR5 M0006 T0022 AA64-01201N KNOB CONTROL 32Z30,ABS,HB,BLK S.N.A...

  • Page 62: Electrical Part List

    3404-000243 SWITCH-TACT 15V,20mA,160gf,6x3.4mm,SPST T0245 0202-001522 SOLDER-WIRE FLUX LFA3-107,-,D1.2,96.5Sn/ 0.001 S.N.A AA97-15910A ASSY AUTO-TACT S/W TXR3079WHX/XAA,CORE,K S.N.A T0091 AA94-15813A ASSY PCB MISC-A/V SIDE ,KS7D,TIME COP C701 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T C702 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, C703 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, C704 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T...
  • Page 63 HEADER-BOARD TO CABLE BOX,3P,1R,2.5mm,ST CNP01 3711-002709 HEADER-BOARD TO BOARD NOWALL,12P,1R,2.5m CNP03 3711-002642 HEADER-BOARD TO CABLE BOX,3P,1R,2.5mm,ST CNV901A 3711-001038 HEADER-BOARD TO CABLE BOX,6P,1R,2.5mm,ST CP02 2203-000384 C-CER,CHIP 0.015nF,5%,50V,C0G,1608 CP03 2203-000384 C-CER,CHIP 0.015nF,5%,50V,C0G,1608 CP04 2203-000181 C-CER,CHIP 100nF,+80-20%,25V,Y5V,TP,2012 CP05 2401-000050 C-AL 10uF,20%,16V,GP,TP,5x11,2.5 Samsung Electronics...
  • Page 64 C-AL 100uF,20%,16V,GP,TP,6.3x11,5 CV601 2202-002037 C-CERAMIC,MLC-AXIAL 100nF,80-20%,50V,Y5V CV602 2401-001026 C-AL 3.3UF,20%,50V,GP,TP,5X11,5 CV603 2401-001989 C-AL 4.7uF,20%,50V,BP,TP,5x11,5 CV604 2401-001989 C-AL 4.7uF,20%,50V,BP,TP,5x11,5 CV605 2401-001989 C-AL 4.7uF,20%,50V,BP,TP,5x11,5 CV606 2401-001989 C-AL 4.7uF,20%,50V,BP,TP,5x11,5 CV607 2401-001989 C-AL 4.7uF,20%,50V,BP,TP,5x11,5 CV608 2401-001989 C-AL 4.7uF,20%,50V,BP,TP,5x11,5 CV611 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 Samsung Electronics...
  • Page 65 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T DV952 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T DZ201 0403-000508 DIODE-ZENER MTZJ5.6B,5.45-5.73V,500mW,DO DZ242 0403-000510 DIODE-ZENER MTZJ6.2B,5.96-6.27V,500mW,DO DZ299 0403-000508 DIODE-ZENER MTZJ5.6B,5.45-5.73V,500mW,DO DZ301 0403-001329 DIODE-ZENER MTZJ24B,22.75-23.73V,500mW,D DZ302 0403-001329 DIODE-ZENER MTZJ24B,22.75-23.73V,500mW,D DZ303 0403-001221 DIODE-ZENER UZ39BSB,35.36-37.19V,500mW,D DZ306 0403-000700 DIODE-ZENER TZP33A,5%,1000mW,DO-41,TP DZ603 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO Samsung Electronics...
  • Page 66 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY435 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY601 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY602 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY603 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY604 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY801 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY8018 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY8019 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY802 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H Samsung Electronics...
  • Page 67 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 L2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 S.N.A L2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 S.N.A L2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 S.N.A L2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 S.N.A L2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 S.N.A L2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 S.N.A L2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 S.N.A Samsung Electronics...
  • Page 68 100OHM,5%,1/8W,AA,TP,1.8X3.2MM LV904 2701-000116 INDUCTOR-AXIAL 10UH,10%,4298 LV905 2701-000158 INDUCTOR-AXIAL 22UH,10%,2534 LX801S AA29-00011A FILTER LINE NOISE CZ32W8,-,0.20MAX,1.5KV M0014 AA97-16528A ASSY AUTO-MAIN ,KS7D,TIME COP S.N.A M0018 AA97-16687A ASSY MICOM T-TIMNKU-1701,KS7D,20060404,A S.N.A M0020 AA96-04061A ASSY BOARD P CL29Z30MQ,S-AMERICA S.N.A M0081 6003-000335 SCREW-TAPTITE RH,+,2S,M3,L8,ZPC(YEL),SWR S.N.A...
  • Page 69 15KOHM,5%,1/2W,AA,TP,2.4X6.4 R830 2001-001078 R-CARBON(S) 15KOHM,5%,1/2W,AA,TP,2.4X6.4 R831 2001-001078 R-CARBON(S) 15KOHM,5%,1/2W,AA,TP,2.4X6.4 R832 2001-001079 R-CARBON(S) 15OHM,5%,1/2W,AA,TP,2.4X6.4M R833 2001-000007 R-CARBON 3KOHM,5%,1/8W,AA,TP,1.8X3.2MM R834 2008-000205 R-FUSIBLE(S) 10ohm,5%,1/2W,AF,TP,2.5x6.5 R837 2008-000290 R-FUSIBLE(S) 2.4ohm,5%,2W,AF,TP,3.9x10mm R841 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM R846 2001-001077 R-CARBON(S) 150OHM,5%,1/2W,AA,TP,2.4X6.4 R848 2003-000664 R-METAL OXIDE(S) 33ohm,5%,2W,AF,TP,4x12m Samsung Electronics...
  • Page 70 R-CARBON 6.2KOHM,5%,1/8W,AA,TP,1.8X3.2MM RV207 2001-000020 R-CARBON(S) 22OHM,5%,1/2W,AA,TP,2.4X6.4M RV208 2001-000362 R-CARBON 150OHM,5%,1/8W,AA,TP,1.8X3.2MM RV209 2001-000362 R-CARBON 150OHM,5%,1/8W,AA,TP,1.8X3.2MM RV210 2001-000362 R-CARBON 150OHM,5%,1/8W,AA,TP,1.8X3.2MM RV212 2001-000780 R-CARBON 470OHM,5%,1/8W,AA,TP,1.8X3.2MM RV213 2001-000666 R-CARBON 33OHM,5%,1/8W,AA,TP,1.8X3.2MM RV214 2001-000780 R-CARBON 470OHM,5%,1/8W,AA,TP,1.8X3.2MM RV215 2001-000666 R-CARBON 33OHM,5%,1/8W,AA,TP,1.8X3.2MM RV216 2001-000780 R-CARBON 470OHM,5%,1/8W,AA,TP,1.8X3.2MM Samsung Electronics...
  • Page 71 S.N.A T0175 AA62-00056A HEAT SINK-PS -,-,T1.0,-,41*35*70,D2,-,-, S.N.A T0175 AA62-00057B HEAT SINK-PS CT-29K12P,A1050S,1.0,41,60, S.N.A T0175 AA62-00057A HEAT SINK-PS -,-,T1.0,-,41*20*60,D2,-,-, S.N.A T0204 AA95-03224R ASSY SUB PCB-PIP CT-29K12P,ET, T0245 AA39-20033F LEAD CONNECTOR-ASSY ,3P,300,67096-003,S, T0245 0202-001522 SOLDER-WIRE FLUX LFA3-107,-,D1.2,96.5Sn/ 0.002 S.N.A 5-10 Samsung Electronics...
  • Page 72 CRYSTAL-UNIT 20.25MHz,30ppm,28-AAM,13pF, 0502-001136 TR-POWER KSD5703,NPN,70W,TO-3PF,ST,8- 0202-001477 SOLDER-CREAM LST309-M,-,D20~45§-,96.5Sn/ 0.03 S.N.A AA62-20002A TUBE-PP -,GSHS,T0.25,PI4,-,-,-,-,- S.N.A T0098 AA94-15666C ASSY PCB MISC-CONTROL KS7D,TIME COP CNY01 3711-000058 HEADER-BOARD TO CABLE BOX,4P,1R,2.5MM,AN DZY03 0403-000508 DIODE-ZENER MTZJ5.6B,5.45-5.73V,500mW,DO DZY04 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 LY01 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 LY02...
  • Page 73 LEAD CONNECTOR ,1P,500,YFH800-01,S,1617# T0070 AA61-01424A HOLDER-CHASSIS 32Z30,HIPS V0,T2.0,G4309, S.N.A T0130 AA96-03803C ASSY COVER P-TERMINAL BOARD 29Z30,SEM,HI S.N.A T0071 AA64-04294C INLAY-TERMINAL 29Z30,PS SHEET,T0.5,KS7D, S.N.A T0415 AA65-00060A TERMINAL-BOARD K61C,HIPS V0,BLK S.N.A T0268 AA39-10006K CBF-POWER CORD -,KJ-10,SPT-2 2/18AWG,240 T0010 AA61-20284A HOLDER P-CORD,PP,-,-,-,BLK,VO,KE-002 S.N.A...
  • Page 74 WINDOW-RMC LED 32Z30,PC CLEAR S.N.A T0175 AA96-03164A ASSY SPEAKER P 8ohm,6*13cm,Z31,10W,SPK+W T0382 BP61-00509C HOLDER-CARE PJT,ACRYL-FOAM,T0.25,W20.0mm 0.28 S.N.A T0382 BP61-00509C HOLDER-CARE PJT,ACRYL-FOAM,T0.25,W20.0mm 0.15 S.N.A T0023 BP64-00326A KNOB POWER 43T9,ABS,HB,BLK,SVM3012 CIS3 BP64-00331B DECORATION-POWER PJTV,ABS,HB,GR503,SVM30 S.N.A T0382 BP61-00495C HOLDER-CARE PJT,ACRYL-FOAM,T0.25,W30.0mm S.N.A Samsung Electronics 5-13...
  • Page 75 MEMO 5-14 Samsung Electronics...

  • Page 76: Chapter 8 Wiring Diagram

    Wiring Diagram 8. Wiring Diagram 8-1 Overall Wiring Samsung Electronics...

  • Page 77: Pin Connection

    Wiring Diagram 8-2 Pin Connection Samsung Electronics...

  • Page 78: Overall Block Diagram

    Block Diagram 7. Block Diagram 7-1 Overall Block Diagram i t p ) l a l a t i t c o i t o i t i t c Samsung Electronics...

  • Page 79: Partial Block Diagram

    Block Diagram 7-2 Partial Block Diagram 7-2-1 System Board Block Diagram Samsung Electronics...

  • Page 80: Chapter 9 Pcb Diagram

    * CNV901A : This is a 6P connected from Tact,S/W pcb for IR,LED,5V. * CN902 : This is a 4P connected from Control PCB for Key1,Key2 input signal. * CN601 : This is a 4P connected to Speaker for Sound output signal. Samsung Electronics...
  • Page 81 Connected to the CRT Ass'y PIN No. Pin Name PIN No. Pin Name TILT CN503B CN701 Connecte to the CRT Ass'y Connected to the Side AV Port PIN No. Pin Name PIN No. Pin Name -16.5V +16.5V HEATER 200V Samsung Electronics...

  • Page 82: Crt Board

    This supplies the final R/G/B signal from the Main Board and the CRT deflection signal to the CRT. 9-2-2 Names & Roles of Key Parts * CN503 : This is a 14P connected from MAIN PCB for R/G/B/AKB/HEATER/B+200V. * GT501,GT502 : This is a 2P connected to TBC-WIRE. Samsung Electronics...
  • Page 83 PCB Diagram 9-2-3 CRT Board Connector Pin CN503 Connects the R/G/B signal and power for the CRT and AMP from the Main Board. PIN No. Pin NAME TILT -16.5 +16.5 Heater +200V Samsung Electronics...

  • Page 84: Chapter 10 Schematic Diagram

    Schematic Diagram 10. Schematic Diagram 10-1 MAIN This Document can not be used without Samsung’s authorization. Power TP07 Signal TP09 TP08 TP09 TP07 TP08 Samsung Electronics 10-1...

  • Page 85: Power

    Schematic Diagram 10-2 POWER This Document can not be used without Samsung’s authorization. TP01 Power TP01 Signal TP02 TP04 TP02 TP04 TP05 TP06 TP06 TP05 10-2 Samsung Electronics...

  • Page 86: Sound

    Schematic Diagram 10-3 Sound This Document can not be used without Samsung’s authorization. Samsung Electronics 10-3...

  • Page 87: Chapter 11 Operation Instruction & Installation

    ENTER button on the remote control. features. + VOL – Press to increase or decrease the volume. In the on-screen menu, use the + VOL – button as you would use the œ œ and √ √ button on the remote control. Samsung Electronics 11-1...
  • Page 88 Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. S-VIDEO Video inputs for external devices with an S-Video output. AV IN 2 Video and audio inputs for external devices. 11-2 Samsung Electronics...
  • Page 89 DVD or DTV set-top box. 480i video signal input is available. AV OUT Connect to the audio/video input jacks of a recording ANT IN VCR. Connect to an antenna or cable TV system. Samsung Electronics 11-3...

  • Page 90: Remote Control

    You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. 11-4 Samsung Electronics...

This manual is also suitable for:

Ks7dnCl29z30pqtxxaxCl-29z30pqCl29m6pq

Table of Contents