Bosch Professional GAS 35 L SFC+ Original Instructions Manual page 19

(10) Wheel
(11) Castor brake
(12) Castor
(13) Cable holder
(14) Closing flap for filter cover
(15) Holder for suction tubes
(16) Holder for crevice nozzle/curved nozzle
(17) Holder for floor nozzle
(18) SFC+ switch
(19) Dust extraction adapter
(20) SFC+ module
(21) Vacuum hose
(22) Curved nozzle
(23) Disposal bag
(24) Flat-pleated filter (cellulose)
(25) Crevice nozzle
(26) Rubber lip
(27) Brush inserts
(28) Floor nozzle
(29) Suction tube
(30) Adapter for vacuum hose holder
(31) Snap fastener
(32) False air intake
(33) Filter cleaning actuator
(34) Filter cover
(35) Fill level sensors
Technical data
Wet/dry dust extractor
Article number
Rated power input
Frequency
Container volume (gross)
Net volume (liquid)
Dust bag volume
A)
Max. vacuum
– Dust extractor
– Turbine
A)
Max. volume flow rate
– Dust extractor
– Turbine
Max. suction power
Area of pleated filter
Dust class
Bosch Power Tools
Wet/dry dust extractor
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
Dust extractor protection rating
Mains plug Switzerland protec-
tion rating
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Automatic start/stop
Rated voltage
230 V
Permitted connected load of the connected power tool.
These values can differ for other country-specific models. Please take
note of the information on the socket of the dust extractor.
Noise/Vibration Information
Noise emission values determined according to
EN 60335-2-69.
Typically the A-weighted sound pressure level of the dust ex-
tractor is 70 dB(A). Uncertainty K = 3 dB. The noise level
when working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a
determined according to EN 60335-2-69: a
K = 1,5 m/s
Assembly
Pull the plug out of the socket before cleaning or per-
u
forming maintenance on the vacuum cleaner, making
GAS 35 L SFC+ tool adjustments, changing accessories or putting
away the vacuum cleaner. This safety measure prevents
3 601 JC3 0..
the vacuum cleaner from being started accidentally.
W 1200
Fitting the holder for the vacuum hose (see
Hz 50−60
figure A)
l 35
– Slide the holder (4) for the vacuum hose firmly into the
l 19
corresponding adapters (30) from above until they click
l 19
into place.
Fitting the vacuum hose (see figure B)
hPa 230
hPa 254 – Attach the vacuum hose (21) to the hose adapter (2) and
turn it clockwise as far as it will go.
Note: The friction generated by the dust in the vacuum hose
l/s 36
and accessory during extraction causes an electrostatic
m³/s 0.036
charge that the user may experience as static discharge (de-
pending on environmental factors and their physiological
l/s 74
state).
m³/s 0.074
Bosch generally recommends using an anti-static vacuum
W 1380
hose (accessory) to vacuum up fine dust and dry materials.
m² 0.615
L
kg
Maximum power Minimum power
2200 W 100 W
(triax vector sum) and uncertainty K
h
h
2
.
1 609 92A 7Z7 | (23.06.2022)
English | 19
GAS 35 L SFC+
11.6
/I
IPX4
IP55
2
<2,5 m/s ,