OPERATION
Monitor Switches Portion
(1)
Working mode selector switch
(2)
Auto-deceleration switch
(3)
Travel speed selector switch
(4)
Wiper switch
Working Mode Selector Switch
Use this switch (1) to set the movement or power of the work
equipment.
The operation becomes easier if the mode is selected to match
the content of the operation.
P mode: For heavy-load operations
E mode: For operation with emphasis on fuel consumption
L mode: For fine control operations
B mode: For breaker operations
ATT mode: For double-acting circuit attachment, such as
crusher (attachment-ready machines)
q
When the monitor first appears, it is automatically set to the
mode in use when it was started the previous time.
q
Press switch (1) to display the working mode selection
screen. For each set mode, the pilot monitor at the top right
of the monitor display shows P, E, L, B, ATT.
q
For machines ready for attachment, the attachment mode is added to the display.
For details of the method for handling machines ready for attachment, see the ATTACHMENTS AND
OPTIONS Section.
DETAILED CONTROLS AND GAUGES
(5)
Window washer switch
(6)
Buzzer cancel switch
(7)
Function switches
(8)
Air conditioner switch
3
3-25