Install The Water Inlet Hose; Select The Water Level - Haier HWM65-113S User Manual

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling
entrance on the control pane directly.(pull it
out to dismantle it)
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
to needed line.
Use the new water inlet hose provided
with the machine to connect to the
water faucet. Old hose sets should
not be reused.
Quick water-filling entrance
You can fill water into the wash tub directly
through this entrance. It can reduce the
humidity inside the control panel significantly
and prolong the operating life of the components.
Insert the water inlet hose into the water-filling
entrance, then push the water-filling jointer into
the quick water- filling entrance. (To dismantle
the water inlet pipe, just push the control handle
as indicated in the figure and pull it out)
Water inlet hose
Water level
indicator
Maximum Max.
Med
Medium
Min
Minimum
Quick water-filling entrance
Water inlet hose
Control handle
6
Water inlet
Water inlet jointer
Push
Quick water-filling entrance