Close The Top Lid; Finish Washing - Haier HWM60-728 User Manual

4.Push the " WATER LEVEL "button, select suitable water level
After switching on the power, when select the standard program, the washing machine will
execute fuzzy program automatically to detect the cloth. After defection, it can set the water level
automatically. T o select other water level, first push the "START/PAUSE" button, then push the
"WATER LEVEL" button to set the water level.
5.Push the "DELAY " button to select suitable delay wash program
After switching on the power, the delay time program is set to off mode automatically. If you
need to set the washing procedure to be finished at delay time, please push the " DELAY "
button to set the delay wash program. Refer to delay button in Page 11 for selection .
Confirm the operation of delay program
When the "Delay time" function is activated, the indicator light of the program you have set
will be off. The "Delay (hours)" and "remain(minutes)" indicator lights will be on. During
reserve procedure, push the "DELAY " button to display the delay time mode.
To change the running program or cancel the delay time setting, you need to switch off the
power and make new selection.
6.Push the "START/PAUSE" button

Close the top lid

If the top cover is opened when the mechine is spinning, the machine will stop
running and alarm.

Finish washing

After Finishing washing ,the washing machine will cut off the power automatically.
14
WATER LEVEL
DELAY
Page 11
START/PAUSE