Haier HWM60-78 User Manual page 13

Child lock function
Push and hold the water level button and spin button, then push down the power on/off
button. The digitron displays CL . You can continue setting desired washing procedures.
After setting, push down the start/pause button. The child lock function is activated. All of
the buttons are locked and cannot make selection.
Release the child lock function: push down the water level and spin button at the same
time for more than 1 second. After a beep sound, the child lock function is released.
Reserve/remain time indicator digitron
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds99 minutes, it adopts A at tens place to
represent 100 minutes, b to represent 110 minutes. For instance, A3
represents103 minutes.
In case of abnormal phenomenon, it displays
the abnormal symbol (see to Page 16)
TIME REMAINED
(MINUTES)
RESERVE
(HOURS LATER)
WATER LEVEL
RESERVE
+
In normal operation mode,
The washing machine can detect the laundries automatically.
the reserve indicator
After detection, it will set the water level to suitable value
light is off. The time
among 4, 6, 8,and 10 automatically.
remain indicator light is
You can also set water level by yourself. After the machine is
on. The digitron displays
started, it will not set water level automatically. You shall push
the time remained (in
the start/pause button to make new setting.
minute) before the If there's water inside the tub, the machine cannot detect the
laundries and will display water level 6 .
washing is finished.
If wet laundries are put in, it may display water level 10 . You
Push down the reserve
must set suitable water level by yourself.
button. The reserve
If posthaste program is selected, it will display water level 3 .
indicator light is on the
When water level 2 is reached in water filling, it will perform
digitron displays the
washing while filling water. When water level 3 is reached, it
reserve time of finishing
will change to normal washing.
washing (in hour).
During operation of wash and rinse program, you can push
When the machine is
down the water level button to add water. When you release
started, the reserve the button, or it reaches the overflow water level, the machine
will stop adding water.
indicator light is on,
The water level decided may be different from actual value
indicating that the reserve
because of the different moisture level of the laundries.
function is running.
PROGRAM
After the power is switched on, push it to Start the machine
During pause, push it to resume working.
Following automatic programs are available for selection
Program
Common
Quick
Posthaste
Carpeting
Normal
Cotton
Woollen
Silk
11
Power On/Off button
Push the On/Off button to switch
on the power.
When the power is on, push it
again to switch off the power.
Push the On/Off button to switch
on the power.
If the start/pause button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
POWER
ON/OFF
START
PAUSE
During working, push it to pause working.
Applicable situation
Common washing
Posthaste wash of the laundry under 1 kg
with light soil
Super quick wash of the laundry under 1
kg with light soil
Washing the relatively big and thick laundriesr
Washing the normal laundries
Washing the cotton textiles
Washing the woollen textiles
Washing the textile