Replace The Pen Nib; Where To Find Replacement Nibs; Where To Find The Nib Replacement Tool - Wacom Cintiq 16 User Manual

Replace the pen nib

Tip
: Replace your pen nib when it is approximately 1 mm (1/25 inch) or has a sharp edge.
1. Grab the old nib and pull it out of the pen.
You can also use the nib removal tool to remove your pen nib. There is a small hole in the pen stand, case, pen end, or pen
holder depending on what was included with your device.
Nib removal tool
2. Get a replacement nib and slide the end of the new nib straight into the barrel of the pen.
3. Push the nib in slowly and firmly until it stops.

Where to find replacement nibs

The extra nibs are stored in different places for different devices. First, look in the box that your device was packaged in. If you do
not see the nibs there, try these places:
If your device included a pen case, check there.
If your device has a removable compartment cover on the back, slide it open.
If your device included a pen stand, unscrew the pen stand.
Tip for the Pro Pen 2 stand
recess. Then, gently guide the bottom of the stand to the right until you feel it click into place.
If you device includes a pen holder attachment, check there.
If you need more nibs, you can purchase them from the

Where to find the nib replacement tool

For some devices, the nib replacement tool is a metal ring included with your device.
For other devices, you will need to use the nib replacement hole to remove your pen nib. The nib replacement hole can be found
in a variety of places depending on your device.
On the bottom of your pen stand
On the pen storage case
On the pen holder attached to your device
Hole in stand or case
: To screw the stand back together, line up the dots on the bottom of the stand and the
Wacom Store.
User's Manual 22
22