Table of Contents
Advertisement
4. Hold the sides of the SFP transceiver module and slide it into the cage socket until
it clicks into place.
Caution: Do not force the SFP transceivers into the cage slots. If the transceiver
does not easily slide in and click into place, it may not be aligned correctly or
may be upside down. If this happens, remove the SFP transceiver, realign it or
rotate it and slide it in again.
5. Press the module firmly into the cage socket with your thumb.
6. Verify that the module is latched correctly by grasping the sides of the transceiver
and trying to pull it out without lowering the extraction lever.
If the module cannot be removed, it is installed and latched correctly.
If the module can be removed, reinsert it and press harder with your thumb. If
necessary, repeat this process until the module is securely latched into the cage
socket.
To remove the SFP transceiver modules:
1. Ensure that you are properly grounded.
2. If applicable, disconnect the fiber-optic cable from the SFP transceiver module
connector and install a clean dust plug in the module's optical bores.
3. Pull the extraction lever out and down to eject the module.
If you are unable to use your finger to open the lever, use a small flat-head
screwdriver or other similar tool to open the lever.
4. Hold the sides of the SFP transceiver module and carefully pull it away from the
cage socket.
5. Replace the cap on the SFP cage socket and place the removed SFP transceiver
module into an antistatic bag.
Note: Follow proper fibre-optic handling procedures when installing and removing
SFP transceiver modules to ensure the devices remain clean and are not damaged.
8. Register Your Product
If you did not register your product using the FortiExplorer wizard, please register
your product now.
Register
Register your Fortinet product in order to receive:
• Technical Support • New product features • Protection from new threats
Enregistrer
Vous devez enregistrer le produit pour recevoir:
• Support technique • Nouvelles fonctionnalitées du produit • Protection contre de
nouvelles menaces
Registra
La reistrazione ti permette di usufruire di:
• Supporto Tecnico • Nuove funzionalita • Proteezione dalle ultime minaccce
Registrar
Debe registrar el producto para recibir:
• Apoyo técnico • Nuevas funcionalidades del producto • Protección contra
ataques
登録のお願い
本日、 フォーティネッ ト製品の登録をしてください。
登録すると次のメリッ トがあります。
テクニカルサポート • 新機能の追加 • 新しい脅威への防御
请马上注册
您的飞塔产品
您在注册以后才能得到技术支持、新产品特点信息、最新威胁防护
Web: http://www.fortinet.com/register
Toll free: 1-866-648-4638
Phone: 1-408-486-7899
Fax: 1-408-235-7737
Email: register@fortinet.com
Advertisement
Table of Contents
