Yamaha 5YF2-AE1 Service Manual page 204

FRONT AND REAR BRAKES
2. Install:
• brake camshaft 1
• brake shoe wear indicator plate 2
• brake camshaft lever
NOTE:
_
• Install the brake camshaft so its punch mark
a is positioned as shown.
• Align the projection on the brake shoe wear
indicator with the notch in the brake cam-
shaft.
• Align the punch mark in the brake camshaft
with the mark on the brake camshaft lever.
3. Install:
• rear brake cable (drum side)
• brake shoes
NOTE:
Check that the brake shoes are properly posi-
tioned.
4. Install:
• brake drum boss
• brake drum
• lock washers 1
NOTE:
Bend the tabs of each lock washer along a flat
side of each nut.
5. Check:
• brake camshaft operation
Unsmooth operation → Repair.
6. Adjust:
• rear brake
Refer to "ADJUSTING THE REAR BRAKE".
in chapter 3.
7 - 13
CHAS
9 Nm (0.9 m · kg, 6.5 ft · lb)
New