Program Play; How To Select Program - Haier L26V6-A8 Owner's Manual

Tuning program
CH+
VOL- MENU VOL+
CH-

Program play

English-13
3.Skip
If current program number is to be skipped, press
VOL-/+ button to set Skip on.
4.Color System
If current program color is to be changed, press
VOL-/+ button and then the color system will
change in sequence of
SECAM PAL60 NTSC443
5. Sound System
If current program sound is to be changed, press
VOL-/+ button and then the sound system will
change in sequence of L
Note: When channels are being scanned, sound
system will be automatically identified and set
according to television signals. If the sound system
is changed by manual operation, the correct sound
might not be broadcast.
6. Fine Tuning
If there is abnormal picture or sound in individual
program, press VOL-/+ button to make fine tune until
satisfactory picture and sound are achieved.

How to select program

1. Select desired program
Select buttons in sequence
Press CH+/- button for program option. (Note:
If Skip is On on one channel, the channel will not
appear.)
Select buttons directly
Press digit button to select the program(If 2-
digit or 3-digit programs are selected , press digit
buttons you needed twice or three times within 3
seconds )
AUTO NTSC PAL
D/K I B/G M L.