Preset And Watch Tv; Power On/Off; Selecting Input Signal For Tv Program - Haier LE22Z6 Owner's Manual

Preset and watch TV

The following is how to use the On/Off key (
off the TV set. (Press the key Channel +/- in standby mode may power on the unit,
its the same for the side panel and the remote control.

Power On/Off

1. While switching on the AC power supply, the blue indicator lamp stands for
standby mode, while no indicator lamp stands for power on.
2. If the TV set is in standby mode, press the On/Off key on the remote control to
power on.
3. Pressing on the On/Off key on the remote control may enter standby mode again.
4. If you don't use the TV set for a long period, unplug the power cord of the TV set
from the socket to save electric energy, because the TV set consumes electricity
even in standby mode.

Selecting input signal for TV program

If the TV set is not in the TV mode, the following methods may be used to select TV
program:
SCAN HDMI
FREEZE P.MODE S.MODE ARC
Ⅰ/Ⅱ
H.LOCK SLEEP FAVORITE
SOURCE DISPLAY
OK
USB BACK
REC TIMESHIFT PLAY/PAUSE HELP
INDEX
REV FWD PREV NEXT
TEXT MIX SUBCODE HOLD
PIP SWAP MOVE ZOOM
?
1. Press source key on the remote
control to pop out signal source menu
on the TV screen (as shown in the right
diagram).
Press the / key and SOURCE key to
select the option TV, and then press >
key or OK key to confirm switching to
TV input terminal. After such switching,
the signal source selection menu
disappears, and the information on the
current signal source is displayed on the
up right corner of the screen. If no other
operations are made, the signal source
menu will disappear in nearly 5 seconds.
2. Pressing the CHΛ/V key or number key may also return to
TV mode.
How to select TV program
Selecting TV program
1. Selecting with number key directly
• Press the number key directly to select the desired number of
channel.
2. Selecting with the CHΛ/V key
• Press CHΛ key to select the channel number in the increasing
direction.
• Press CHV key to select the channel number in the
decreasing direction.
Selecting TV volume
Press the VOL+/- key to adjust to the desired volume.
) on the TV remote control to turn on/
12