Manually Deploying A Generic Site Object - Cisco 12000 Software Manual

Deployment
Figure 3-4
Stage 1: Manually
deploy a generic object
1.
2.
Note
3.

Manually Deploying a Generic Site Object

Generic objects are non-technology specific objects. When deploying a generic object, the information
you are prompted to provide differs according to the type and number of generic objects you are
deploying.
Table 3-1
Manager.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
3-10
Deployment Process Workflow
Stage 2: Chassis
level deployment
The first deployment stage is to manually deploy a Generic (Site) object. A Site object can be looked
upon as a container object where you can deploy further objects that represent the
Cisco 12000/10720 Router chassis, line cards and interfaces contained within the chassis. See
"Manually Deploying a Generic Site Object" section on page 3-10
The second deployment stage is at the chassis level. The Cisco 12000/10720 Router chassis can be
auto discovered or manually deployed. See
page 3-19 or the "Manually Deploying a Cisco 12000/10720 Chassis" section on page 3-20
further details.
You can pre-deploy objects (that is, manually predeploy objects) before the Cisco hardware
arrives on-site. See "Pre-deployment" section on page 3-58
The third deployment stage is at subchassis level. This involves either subchassis discovery or
deploying subchassis objects (modules) manually. See
section on page 3-26 or the
displays a list of generic objects that can be deployed using Cisco 12000/10720 Router
OR
the Cisco 12000/10720
Stage 3: Sub-chassis
level deployment
Sub-chassis
Discovery
Optional
Manually deploy
Sub-chassis objects
"IP Auto Discovery of the Cisco Chassis" section on
"Manually Deploying Modules" section on page 3-30
Chapter 3
IP Auto-discovery of
Cisco 12000/10720
series chassis
Manual deployment of
series chassis
AND/OR
for further details.
for further details.
"Commissioning and Subchassis Discovery"
Getting Started
for
for further details.
OL-4455-01