Cisco 12000 Software Manual page 22

Deployment
Figure 3-16 Deployment Wizard—Object Parameters Window (3 of 3)
Enter the following information:
Step 3
12000 Chassis Name—Type in a name (including prefix and suffix) for the chassis you are deploying.
A default prefix appears (for example, "12008"). You can delete this prefix and use your own, or you can
keep it and add your own suffix. This name must be unique.
IP Address—Type in the IP address for the chassis you are deploying.
Subnet Mask—The subnet mask for the IP address of the chassis.
SNMP Details—Type in the SNMP read and write communities, and select the SNMP version. The
default SNMP version is 2c.
Chassis Initial State—Specify the initial state for the chassis after deployment. The default initial state
of the chassis is decommission. When the user selects commission, the chassis is automatically
commissioned upon deployment.
Note
Click Forward to continue. The Deployment Wizard-Views window appears.
Step 4
Cisco 12000/10700 v3.1.1 Router Manager User Guide
3-22
Cisco 12000/10720 Router Manager allows the user to deploy a single chassis, more than once
provided they have unique subnet masks.
Chapter 3 Getting Started
OL-4455-01