GUIDE (DISC T) ALIGNMENT
Cam
(1) Rotate the cam and adjust to the
position shown in the figure.
(2) Check that the state is as
shown in the figure.
A
B
Guide (disc T)
(3) Loosen the fixed screw by about 60 °.
Guide (disc T)
Guide (disc T)
Disc
Disc
Holder
(guide T)
Cam
(4) Move the holder (guide T) with a tapering screwdriver,
and set the position of the guide (disc T) to A:B=1:1.
– 14 –
Holder (guide T)
Fixed screw
Tapering screwdriver
Holder (guide T)