Mounting The Wlc526 Controller - Cisco Wireless Express 526 Quick Start Manual

6

Mounting the WLC526 Controller

The WLC526 controller can be mounted as follows:
• On a horizontal or vertical surface such as a desktop or shelf.
• Face up or down on a vertical surface such as a wall.
Mounting on a Desktop or Shelf
The WLC526 has four rubber pads on the bottom to help prevent it from sliding on or scratching the
surface of your desktop or shelf.
Mounting on a Vertical Surface
The bottom plate of the controller has two keyhole slots to facilitate mounting on a vertical surface
(see Figure 12).
18