Echo 0232291 Operator's Manual page 15

Install blower pipes for blower usage
1. Blower pipe
1. Blower pipe
Remove blower pipes/vacuum elbow
2. Flat straight nozzle
Before you start
1. Stand unit upright on blower base.
2. Align locking ribs (A) on the blower pipe with recesses (B) in
fan case. Assure short locking rib (C) faces downward. Slide
the blower pipe into fan case until a clicking sound is heard.
3. Align tabs (D) with grooves (E) and slide the flat straight noz-
zle over the blower pipe until there is light resistance. Do not
force connection.
4. Hold the blower pipe, and turn the flat straight nozzle clock-
wise, engaging positive locking channels until connection is
firm. Do not force connection.
NOTE
Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If loosen-
ing occurs, remove the flat straight nozzle and install according
to instructions 3 & 4.
1. Insert screwdriver (F) into hole located near lock symbol (G)
to release pipe lock.
Screwdriver tip may stick out opposite side of locking
hole.
2. Pull pipes out of fan cace.
3. Remove screwdriver.
15
CAUTION