Mechanism Adjustment - Pioneer DV-350-K Manual

1

6.5 MECHANISM ADJUSTMENT

A
Tangential and Radial Height Coarse Adjustment
1
START
• Remove the servo mechanism.
• Remove a Spacer for height adjustment
attached to the back side (shaded area)
of the Servo Mechanism (Float Base) with
nippers.
B
Spacer for Height adjustment
Note:
Turn the Short switch to Short side when
C removing the Pickup Flexible Cable.
(Refer to "7.1.6 DISASSEBLY".)
D
E
F
54
1
2
Servo Mechanism
Float Base
2
3
Cautions:
Because there is not a Spacer for height adjustment in
adjustment after the second time, will keep it at need.
(This parts is Traverse mechanism exclusive use of a model
for 2001 years)
Put a spacer between a Tangential (or Radial) adjustment
screw and Mechanism Base and turn each screw to adjust
the height. (Refer to "6.1 ADJUSTMENT ITEMS AND
LOCATION".)
Turn a flat side
into bottom
DV-454-K
3
4
7.3mm
4